Cannon MULTIPASS C530 Printer - Page 6 - Answered Questions & Fixed issues
How to solve blank copy error in cannon 6570
Hi, does the problem occurs only on copies? Are prints ok ?
if all ( copies and prints ) are blank , please check the primary charging corona and the transfer separation corona, corona central wire most be clean
How i can correct if error of 0000 from cannon 2520
Hi. You need to clear that error from service mode
with the copier turned on do the next secuence
press aditional function
press 2
press 8
press aditional function
when #sssw appear on the screen search with arrows in the touch panel until CLEAR appear on the screen
press ok once
and search with arrows until ENGINE appear on the screen
press ok once
ERRCLR appears on screen . press ok one more time
turn off the machine from main switch for a few seconds
turn on again and make copy test .
if problem persist replace the fixing heater.
please rate this anwaser if it was useful to you
Evrytime I try to copy with my cannon MX492 the stop button comes on and it wont print. Why??
Hello,
1, I would suggest you reset your Canon MX492 printer and see if the issue is resolved. If not, take it to the nearest Canon service center and get the hardware changed.
2, To reset, unplug all the connections without turning off the printer and provide the connections back after a few seconds. Allow the printer to function automatically if not, turn it on manually with the Power button.
What is an error code 1008 on cannon printer mx922
Re: PIXMA MX922 prints 2 blank pages only...error 1008
-
-
-
- To try and resolve the issue, please ensure that the paper guides in the paper tray are snug against the paper, and that the cassette tray is fully pushed in. Once has been done, we recommend performing at least three roller cleanings on the printer, be sure paper path is clear and that the paper can feed smoothly.
If you still experience difficulty, we ask that you please call 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays) for further assistance. A Canon technical support representative will be happy to help. There is no charge for this call
9/14/2018 8:51:19 PM •
Cannon Office...
•
Answered
on Sep 14, 2018
•
1,161 views
Cannon mx 330 printer/fax. I plugged into the comcast modem for Tel 1 line then to the back of the cannon fax L. that didn't work so I connected it to the telephone line on the back of the fax..Help
The Pixma MX330 Line port needs to be connected to a POTS (plain old telephone service) line jack with an RJ-11 cable. A standard corded telephone or the base of a cordless system gets connected to the Tel port on the MX330. The Comcast modem connects devices to the internet. You might be able to use a VOIP (voice over internet protocol) service between the MX330 and the modem. You will need the appropriate hardware (MagicJack, Ooma) in between the modem and the Pixma and get an assigned telephone phone number.
Generally, you will need a compatible router to share the cable modem's internet service between any computers and a stand-alone VOIP system like the Ooma.
I hope this helps. Please add a comment with more about your Comcast hardware for additional information. I know my home's fiber-optic modem service does support POTS, in addition to the internet and TV service. Each service has their own wiring/jacks that go back to the modem.
Cindy Wells
Not finding what you are looking for?
