I am trying to hook my ipod into the aux inputs in the back, but it won't play. I clicked function because the manual said i had to go through that to turn them on, but there wasn't a "aux" under function. Does anyone know how to get them to work?
Turn the ignition key to on or accessory position, turn the stereo off, then hold the function key for a couple seconds, the stereo will turn on and you scroll through the menu with the left and right arrow buttons and change settings with the up and down buttons
Posted on Apr 30, 2009
i need the wiring diagram for the color coded wires on teh back of my pioneer deh-p6800mp
You can find the wiring diagram online in a PDF of the installation manual, which is at this location
Hope that helps!
Posted on Jan 14, 2008
I can't change the clock time, any suggestion?
the clock does not flash by pressing the (src) source button. press (scr) source button until clock appears then press the func function button (it is just under the audio button) then the clock will flash. press the up down buttons to change the hour then press the side to side buttons to switch to the minutes then press the up down button to change the minutes
Posted on Aug 20, 2008
I have a pioneer deh-p6300 i keep getting an error 17 when cd is loaded.
I have just replaced the battery in the vehicle. any help with this would be great Thanks
manual said electrical / mechanical. As it's to do with the CD it's probably mechanical. not a lot you could do, Probably the motor is jammed, lens needs cleaning something like that. Best think without opening it up. shoot some air down into the CD slot
Posted on Oct 01, 2008
I have a pioneer DEH-P6800mp car radio and the ribbion cable is broken between the face plate and the mother board. I need some help finding the part number. Thanks Shane
Posted on Nov 25, 2008
it's inside the middle console and wont load any cd's. spins for abou 2 or 3 sec and displays cddj error on display. the radio functions all work everything but the cd player it's self. can anyone help... please
I've had GREAT success by resetting the changer. Try unpluging the changer with the power ON, wait a few, then plug back in. It's not hard to remove. Can I assume that you did NOT misload or install any CD' upside down? If not, then proceed with a reset. Can you eject the magazine? If so, proceed with reset. If you can NOT eject the magazine, then you will need to "open up the can" and do a manual eject with power assist by moving the gears while pushing the eject button. Sounds like a lot, but for me it's easy. Remember patience!!
Larry T
Winona Lae, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html
Posted on Jan 28, 2009
Have a plug that came with the CD Player but it looks like it is missing a wire and I am trying to find out which one. Need a color coded wiring harness diagram to make sure all the wires are there.
Hello randscates,
Here's a link to the manual. The wiring color code for the supplied harness is on page 78. The diagram is rotated 90 degrees clockwise. I recommend that you download the PDF and print out the page you need.
Hope this helps.
Posted on May 16, 2009
want to turn off the annoying beeping sound every time i push a button on the unit, remote or adjust the volume
Turn the unit off by pressing and holding the volume button till it powers down (NOT VIA THE IGNITION SWITCH!) Once off, press and hold the fuction button (located in the top left hand corner near the volume dial) until unit lights up again and a menu appears, near the end of that menu you can change the beep noises to off like volume or when ignition is off but unfortunatly you cannot change the beep for changing track.
Posted on Jul 08, 2009
cant find where the aux input is on my stereo? also what cable do i need? i have got AUX appearing on my stereo display just don't know where to put an input. Manuel doesn't tell me...
plug it in right below the sat icon on face it is a 2.5mm plug end so in most cases you need a 2.5mm male to 3.5mm male
Posted on Sep 18, 2010
how do you set clock on pioneer wma/mp3 supertuner III car tuner
Press function repeatedly until the clock appears in the display. Then use the left and right arrows to select hours or minutes. As you select the segment of the clock the selected segment will blink. Then press the up or down arrow to change the setting accordingly. Press function again to exit the clcok setting
http://caraudio.manualsonline.com/mdownloads/751a22f3-8f11-4855-a9fa-e2ec2056a118.pdf
Posted on Nov 26, 2009
274 questions posted
Usually answered in minutes!
257 Questions
245 Questions
227 Questions
184 Questions
125 Questions
