20 Most Recent
Questions & Answers
I have an AEG B3101-4
first check the power to the unit itself, to be sure the house power is on , if the unit is totally dead,, then remove the back to locate a fuse that will be just next to the incoming line, check both of these items with a volt meter if you feel thats something you can do.
on Jul 13, 2011
Went to switch oven on
HI, Sounds like your from the UK
If you are referring to a trip switch as being equivalent to an American circuit breaker. (Electrical safety device designed to shut down power to an electrical appliance). Then we are on the same page.
Do the following diagnostic procedure:
1 SHUT DOWN THE POWER SUPPLY TO THE OVEN. I.E. THE TRIP SWITCH/CIRCUIT BREAKER.
2 Open the oven door and look very carefully with a flashlight at
the heating element. Look at the the entire element. If
it blew (similar to when a light bulb blows) you will
powder around the hole in it or it will be completely broken, or have
bubbles in it. Some indication like that. If so it has failed and
must be replaced. It is probably tripping the switch because it is shorting out somewhere. There is also the possibility that the internal wiring connectors to where the element is mounted into the oven walls is broken off and short circuiting against the oven chassis (walls). That being the case, it may be just a wiring repair in which you install new appropriate electrical contacts and re-connect the element.
Hope this helps,
Happy New Year,
on Dec 31, 2010
My AEG B3191-4 oven works for about 30 mins, then
Your cooling fan may not be working. either the fan is faulty or its controling device is not switching it on it also allows the fan to run on after the oven has been turned off. its located in the wiring loom behind the switches. part 899661926761-1 costs £26
on Jul 18, 2010
do not shoot the messenger
here but I have read that people took a hair dryer
to melt the glue that is possible
culprit to why you
cannot get this from the fascia. I know there is not screws involved so do not be fooled into any answer the involved screws, its got to be some type of glue holding it.
Thanks I hope this helps please do click the accept button for my efforts.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620
on Mar 18, 2010
My AEG B3101-4 oven works for about 30 mins, then
It is a safety thermostat that is cutting the oven off, due to overheating.
It could be that the external cooling fan is not working, or the cut out itself is faulty.
Check to see if you can hear the fan working.
This is usually located on the top of the oven , at the rear of the oven, on the top .
Hope this helps.
on Dec 13, 2009
Fan won't knock off.
the most likely cause is a failure in the cooling fan cut out switch.
It is located underneath the top cover of the oven.
replacement is fairly straight forward.
I have attached a photo so you know what it looks like.
I can supply you one if you have trouble sourcing one.
Just email me on [email protected]
on Nov 18, 2009
Not finding what you are looking for?