20 Most Recent Maytag MAH6700A Neptune High Efficiency Front Loading Washer - Page 6 Questions & Answers

0helpful
1answer

Price for a LCD POWER CONTRO MODULE

www.searspartsdirect.com/partsdirect/brands/Maytag-Parts
6/29/2014 2:28:05 AM • Maytag Neptune... • Answered on Jun 29, 2014
0helpful
1answer

Were there recalls on any of ghese models

The problem of residual water in front load washers is an on going problem. Some companies had put in a small drain hose in their units to alleviate the problem. Your washer is actually built by Whirlpool. There is no available auxiliary drain for these models. These are the suggested solutions to alleviate for your particular machine. 1. Leave the door open after wash completed. This will help to evaporate the residual water. If in an area where the door cannot be left fully open then place a towel over the top of the door to keep it from closing and that will help by keeping the door open a small amount. 2. To alleviate odor, pour one cup of bleach in the drum... DO NOT PUT ANY CLOTHES IN THE MACHINE! Put the washer through a wash cycle... some models had a clean cycle if your has this then use this cycle. Once this has completed remember to do a white load following this procedure to assure that if there is any bleach residual then it wont cause problems with colors. 3. Dry the door seal after each use... this will eliminate mold from developing on the door seal. If you see mold then use a bathroom cleanser for mold removal to clean the seal... DO NOT USE A SOLUTION OF VINEGAR... THIS COULD DRY OUT THE SEAL CAUSING IT TO CRACK THUS REQUIRING REPLACEMENT. FYI: The Maytag Company went bankrupt sometime ago, the name Maytag wash purchased by Whirlpool and appears on products to secure the business of faithful Maytag users...
4/19/2014 2:25:20 PM • Maytag Neptune... • Answered on Apr 19, 2014
0helpful
1answer

Have a Neptune Maytag frontload washer. The door is open but the lock mechanism is locked so cannot shut the door. Is there a code for this??

try un pluging washer for 15min and plug back in to see if it resets. if not u may need new latch but first make sure u don't have a loose wire to lock
4/7/2014 7:00:51 AM • Maytag Neptune... • Answered on Apr 07, 2014
0helpful
1answer

Maytag MAH8700AWW noisy. Bearing?

In some cases it is a simple adjustment of the Levelers. Use a flat level device to check the levels from front to back and side to side. Make certain the Washer and Dryer have a space between them and they do not bang into one another.
3/17/2014 9:20:54 PM • Maytag Neptune... • Answered on Mar 17, 2014
0helpful
1answer

Whirlpool 800 series

WHY DO YOU WANT TO DO THIS IT IS NOT SAFE FOR YOU OR YOUR FAMILY IF THEY GET HURT HOW WILL YOU FEEL ARE YOU INSURED FOR THIS
2/7/2014 10:32:00 PM • Maytag Neptune... • Answered on Feb 07, 2014
0helpful
1answer

When I turn on my washer it sparks inside the drum and immediatly shuts off

you may have a broken heater
1/29/2014 9:00:59 PM • Maytag Neptune... • Answered on Jan 29, 2014
0answers
0answers
Not finding what you are looking for?
Maytag MAH6700A Neptune High Efficiency Front Loading Washer Logo

Popular Tags

25 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Neptune Maytag

  • Neptune Maytag

Most Popular Question

maytag front loading washer will not

  • Washing Machines
Loading...