Akai PDP4294 42 in. EDTV-Ready Plasma Television - Answered Questions & Fixed issues
Change video input without remote
Normally you HAVE to use the remote. If it is on the television, there is normally a 4 arrow button and there is a button in the centre which is enter.
Remotes are easily sourced and a authentic copies of the original. Google
make model replacement remote
Akai TV: HDMI port?
Have a look on either the side or back. It looks like a USB but a different shape. If the TV is really old it may not have one
I have LG 46 Inch 3D Led T.N which i had
Vertical lines aren't generally caused by a bad panel, horizontal lines are...remove the cables going from the Tcon board to the panel, both at the tcon and panel, wipe them down and re seat them and see if that takes care of the issue, if it doesn't replace the timing board, I don't think this is a panel issue
Faint red blotches on the screen of my 52inch sony wega
If this is the model with a light engine, then there lies your problem. Your filters in the engine are burning up. The light engine will need to be replaced. If this is an older model with the 3 tubes you might be able to adjust your red green and blue tubes to get the picture back in good standings. Please keep in mind when asking questions to include both the make and model number. This will help us help you more efficiently.
AKAI PDP4273M NOT TURNING ON
Fault at its main digital or sustain board.
Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
How can I get it working?
Based on your description it appears there may be something wrong with the buffer board. The repair business these days is a lost art and now all they do is identify the offending board and simply replace it entirely. There is no cheapo, cheapo fix to your issue.
I have a magnavox tv model 26MD255V
You need to unplug it let it drain the power for a few hours. Unscrew the back panel and Look for the blown capacitors on the PSB power supply board. Power supply board is usually in the center and it will be printed on the board itself. The caps should be completely flat (X)-top cap view. No puffed split or bulged caps. A solder kit w flux from harbor freight or radio shack and a set of new Thru hole caps is what your going to need.
LED TV will not turn on
Its a power supply problem. A capacitor has gone bad. If you open the back panel - check the board of the power supply. It will have numerous capacitors soldered on to it. The faulty one will have its top surface - bulged out. Read the specs on it. Then buy a new one of same or higher rating from radioshack. Replace it. (To do this you should be familiar with the art of soldering. If not take help from an electronic technician)
Tv wont come on and the red light blinks
These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "
Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given.
No sound?
Check and replace damaged component/s in it audio out put circuit.
My tv not come on
Check and replace its main power supply regulator board as card basis.
Not finding what you are looking for?