20 Most Recent Akai DVDRW120 DVD Recorder Questions & Answers

The way I have it set up - cable box out to AKAI cable in, video and audio out of AKAI into TV via RCA. AKAI on channel 3, tv on RCA input. Change channels on Cable box, works fine. To watch a video, just put it in an hit play. Might have to change sources on AKAI if this is not working for u.

Akai DVDRW120... | Answered on Aug 23, 2013

This is a common problem. There might be a cd stuck inside (they ussually get stuck on top spindle) plug out and open cover and manually release cd

Akai DVDRW120... | Answered on May 16, 2011

aparece un signo en la pantalla parte inferior derecha de mi televisor, todo el tiempo de reproduccion de material, ya sea de dvd o usb, por favor ayudenme

Akai DVDRW120... | Answered on Sep 27, 2010

I am pursuing the exact problem above. I have found a not so hi tech solution. I firmly rap on the top above the disc drawer. This is while Close is being displayed and the drawer is in. If you hear some spinning and load displays it should now work. It may be back to cycling again on the next ejection though.
Technically I figure it may be a sticky magnetic reed switch or what ever they use to detect the drawer position. Mine displays either open or close when it starts to cycle.

Akai DVDRW120... | Answered on Dec 18, 2009

Well, if you don't know the original password, I can't help you, but if you do, Here is what you do: Go to menu, then to parental control ( I am a little fuzzy on that part, just go to something similar to that) then go to change password, then input the original password once, then insert the new password into the "new password" slot and "confirm password" slot.

Akai DVDRW120... | Answered on May 18, 2009

akai phone # use to be 310-664-8060

Akai DVDRW120... | Answered on Jul 25, 2008

I have no remote control akai dvdrw120, someone I could provide a model to be able to locate.

Akai DVDRW120... | Answered on Jan 26, 2008

The applicable code(s) would be in the remote control, if it is compatible.

Akai Televison &... | Answered on Jan 13, 2021

Attach the antenna to the appropriate connector on the rear

Akai Televison &... | Answered on Dec 12, 2020

EHT or Extra High Tension is the power supplied to the final anode of the cathode ray tube.

The EHT is traditionally generated by the line transformer from the flyback pulse of the line oscillator/amplifier.
The generated high frequency high voltage current was from the outset rectified by a thermionic diode (eg. EY51, EY86) but by the late 1960s/early 1970s technology brought high voltage diodes and semiconductors rapidly replaced the old technology and the output from the line transformer then typically fed the anode via a semiconductor voltage doubler.

The rectified EHT was originally smoothed by a high voltage oil-filled capacitor but that was soon deleted in favour of spraying the outside of the CRT with a metallic paint and grounding it. This became the high voltage smoothing capacitor with the glass of the CRT being the dielectric and the final anode the positive pole...

Akai Televison &... | Answered on Oct 12, 2020

is it working ,i want the code

Akai Televison &... | Answered on Sep 27, 2020

Check if the channel is off-the-air due to an issue at the transmitter. After a severe storms, some local stations lost their transmitter because the tower fell. More often, the transmitter hardware can fail. One station repeater near me had an interesting period where it didn't get the incoming signal from the primary transmitter.

Check that your antenna hasn't shifted to point away from the transmitter. Reposition the antenna, if needed. If you have an amplifier on your antenna, check if that has been damaged. If it has been damaged, replace it. My household found that the antenna/splitter became a filter for one VHF channel when damaged by a lightning strike. The check was to connect the antenna to one TV without the amplifier.

The other common issue is interference. Has there been construction in your area that added a large building between you and the transmitter?

I hope this helps.

Cindy Wells

Akai Televison &... | Answered on Sep 06, 2020

First try checking the "auto off" function. I am not familiar with Akai TVs so this advice is very basic. Use the 'Menu' button and find Settings, (It might also be listed as Set Up). Go into this section of the settings. There should be a feature listed as 'Time' or 'Timer'. Set this to Off.
Your other option, if it is a brand new TV is to contact the store you bought it from and ask their advice.

Akai Televison &... | Answered on Jul 03, 2020

Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts.
Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences of the author of that site.

Akai Televison &... | Answered on May 05, 2020

Kindly read the instrunctions on the photo below.

Thank you for using Fixya.

Akai Televison &... | Answered on Apr 17, 2020


Akai Televison &... | Answered on Apr 13, 2020

Not finding what you are looking for?
Akai DVDRW120 DVD Recorder Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers


Level 3 Expert

85239 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Akai Televison & Video

  • Akai Televison & Video

Most Popular Question

akai dvd recorder tray will not open

  • Televison & Video