E-Machines W3107 (RBW3107) PC Desktop - Answered Questions & Fixed issues

ok do you have more info? its usually very simple.
the main power from the PSU goes to the motherboard by a big connector .. this connector is the only one that fits the motherboard and the connector is usually in the middle of the motherboard

E-Machines W3107... | Answered on Sep 22, 2014 | 49 views

yes you can reset it ... tapping Esc key if it is in DOS

E-Machines W3107... | Answered on Apr 24, 2014 | 56 views


Check your Cd-rw for bent pins or dirty connections. If its not that then you can try the drive in another computer (if you have one) and see if it works. If not then you probley need a new drive. Check www.newegg.com for new drives. Hope that helps.

E-Machines W3107... | Answered on Feb 03, 2014 | 42 views

Re-install smilebox.

E-Machines W3107... | Answered on Apr 18, 2013 | 70 views

Hello there and welcome to fixya
Could you please tell me what kind of computer and what operating system you have so i can provide you with the best possiable solution ok
'best regards mike

E-Machines W3107... | Answered on Mar 02, 2013 | 43 views

An eMachines desktop or laptop computer fail to boot for a variety of reasons, but a fast, loud fan noise signifies that the system is suffering from overheating.

The problem, and the steps for troubleshooting it, is not unique to the eMachines brand.
When the internal temperature of the computer reaches too high a level, the system will shut down automatically to allow the heat to dissipate.

If you attempt to power up too soon, the machine will not boot properly.

To boot, you will need to correct the cause of the overheating, and keep the machine cool.

Blocked Vents

Although different in size, both desktop and laptop computers have air vents to help the fans keep air circulating around the hot internal components.

If these vents become blocked, by pushing a desktop too near a wall or using the laptop on a soft surface, the air supply your internal fans need to cool the system is cut off.

This blockage also traps the heat inside, allowing it to build to dangerous levels.

Keep the air vents on your computer free and clear to allow proper airflow.

Dirty Computer

Airborne particles, such as dust, lint and hair, can gather on the air vents and internal components over the course of time.

This accumulation of dirt not only provides a sort of "insulation" to the electronic components, preventing the heat they generate from dissipating normally, but it also clogs the fan and heat sink to prevent proper function.

Use canned air and damp, soft cloths to thoroughly remove any built-up debris from inside your computer.

Dried Thermal Paste

The heat sink sits atop the CPU chip to help dissipate the heat the component produces.
Thermal paste is layered between the CPU and the heat sink to help draw the heat away from the chip for cooling.

Over time, the cooling properties of this paste decreases, and the substance becomes dry and flaky.

You can replace this paste to renew its cooling assistance by removing the old paste remnants with rubbing alcohol and adding a new layer.

Thermal paste is also known as thermal compound or thermal grease, and is available at most electronics stores.

Hot Environment

When examining overheating causes, don't overlook the environment you use your computer in.

External heat sources, such as fireplaces or even rays of direct sunlight, can cause the internal temperatures of your computer to rise.

This causes your internal fan to run harder in an attempt to dissipate the combined heat before temperatures rise too high.

Move your computer away from external heat sources to encourage more effective cooling.

E-Machines W3107... | Answered on Nov 07, 2012 | 30 views

i have no clue what you're talking about

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

E-Machines W3107... | Answered on Aug 02, 2012 | 490 views

Download Emachine w3107 Driver ..go to driverzone.com then download audio driver

E-Machines W3107... | Answered on Dec 25, 2013 | 201 views

Test all power and data leads that attach to your hard drive IDE,SATA

the leads from your (motherboard to your hard drive) make sure they have secure dust free connections and are not faulty or just replace them they might be faulty

if its a 40 pin flat ribbon type it will be the first to fail

make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty

even something as small as a faulty electrical fan and its lead can cause you problems

computers need all power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error

make sure your graphics card is securely seated with no dust built up or in the socket

if you remove your graphics check the socket to make sure its dust free

restart your computer then reinstall it this should activate found new hardware wizard

hope this helps

E-Machines W3107... | Answered on Jul 13, 2012 | 61 views

hmm..ok try it while pressing F8 on power up to go to safe mode

let me know how that works for you

E-Machines W3107... | Answered on May 23, 2012 | 41 views

Depend on the operating system you are using. There is a program you can buy to retreive your pass word. Unless you know someone with that software or it depend on the operating system you now have.earlier windows can be retrieve much easier. Either way you will need to buy it.

E-Machines W3107... | Answered on Mar 25, 2012 | 54 views

Try right clicking on my computer and select manage. You can reach my computer in the start menu if it is not on your desktop.Then click on device manager.There will be a listing sounds and audio devices double click that and options should come up to scan for hardware changes update drivers.Choose to udate your drivers and it should prompt you to search the web for updated drivers. Once you have updated the drivers reboot the pc. Hope this helps.

E-Machines W3107... | Answered on Mar 14, 2011 | 24 views

This machine originally had a 100GB PATA (EIDE) hard drive. It should be able to take any size PATA drive currently available. If you install it and your system happens to have the old 137GB BIOS limitation, update the BIOS. If that doesn't work, you can buy a PCI hard drive card that will allow you to use the entire drive.
This machine has on-board nVidia GeForce 6100 video but it also has a PCI-express X16 slot for a dedicated video card which would improve video and system performance. Any PCI-e card will work but if you don't want to have to get a larger power supply, make to to get one that doesn't require more power than your system can handle.
This machine also comes with only 512MB of DDR PC3200 memory but it can be upgraded to as much as 2GB.

E-Machines W3107... | Answered on Feb 22, 2011 | 59 views

more then likely the DVD laser part of the drive has burned out, i have nearly the same model and had to replace mine a couple years ago!! This is a classic situation, the CDROM laser is still functional, but DVD is inop!!! New DVD-RW Drives about $20 on www.NewEgg.com and even cheaper on www.eBay.com for a decent DVD-ROM model!!! Easy fix too, just make sure you get the IDE style, or make even faster with SATA, if you have a SATA available on your system!!

E-Machines W3107... | Answered on Feb 20, 2011 | 90 views


E-Machines W3107... | Answered on Feb 09, 2011 | 71 views

I highly doubt anyone here will give you their key. If you want to use word, their is a free office suite known as Open Office. If you want the software, i suggest buying it, or asking a friend or family member.

E-Machines W3107... | Answered on Dec 30, 2010 | 51 views

Restart computer keep hitting the " r " key will take you into recovery , do a destructive recovery , you will have to reinstall programs added since computer was new , if you dont show (d) can contact e-machines support @ (408) 273-0888 they will send you a recovery disk for $20.00 takes about 5-9 days.

E-Machines W3107... | Answered on Dec 30, 2010 | 92 views

use this http://pogostick.net/~pnh/ntpasswd/ to remove the present password then put your own.

E-Machines W3107... | Answered on Dec 21, 2010 | 40 views

It could be feedback from your microphone. Place them further apart and see if that makes a difference. Otherwise, the sound card might be bad.

E-Machines W3107... | Answered on Dec 09, 2010 | 49 views

any will do you just need to know if it is a sata or ide if its has a ribbon belt pluged into the back of it its normaly grey in colour and two or thee inch in width if it doesnt have this conector it a sata.

E-Machines W3107... | Answered on Oct 08, 2010 | 57 views

Not finding what you are looking for?
E-Machines W3107 (RBW3107) PC Desktop Logo

56 questions posted

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers


Level 3 Expert

1997 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides