20 Most Recent
Envision H191W Monitor - Page 3 Questions & Answers
Envision blinking blue light on non working monitio
normally the blinking light is a shutdown response to an error in the circuits. remove all cables an replug only ac does it still blink then its the power supply likely but not necessary. its just refusing to turn on until condition is corrected.
10/19/2014 8:08:48 AM •
Envision...
•
Answered
on Oct 19, 2014
Blue box does not go away
The recycling truck driver just empties your blue box and puts it back for your convenience. It never goes away.
10/14/2014 8:54:30 PM •
Envision...
•
Answered
on Oct 14, 2014
Monitor not working when plugged into laptop
On some laptops, you need to enable the external monitor port. Look at the number keys across the top of the keyboard. There should be some legends in blue on them. These are associated with the Function (Fn) key. One of the blue legends will most likely activate/deactivate the external monitor port. Press the Fn key along with the associated number key to activate/deactivate the monitor port.
9/7/2014 3:07:09 AM •
Envision...
•
Answered
on Sep 07, 2014
White Screen/ thin blue vertical lines
Check the cables, try a different monitor, try this monitor on another computer. This will isolate the problem. If it is the monitor, it is not worth fixing, usually. It is far cheaper to make things than to fix them. If it is the computer, a new video card can be installed.
5/7/2014 2:57:05 AM •
Envision...
•
Answered
on May 07, 2014
Not finding what you are looking for?