20 Most Recent Hyundai Q320 32 in. LCD Television - Page 6 Questions & Answers

Yep, I can help but I am afraid that I won't be able to bring totally good news.

The TV is in forced standby also called "protection". Protection kicks in when an internal fault such as a short (big power draw) or a wrong voltage is detected. The click comes from a relay activated by the protection circuit to force TV to shut down.

All you can do is disconnecting the power cord, checking if there is a fuse built in the power cord, replacing fuse and connecting back after about 30 minutes (that allows power drain). If the TV does not work there are faulty internal parts that need replacement.

If now the TV does not start at all, and not even the standby light is on, then the problem is usually the PSU. The part must be tested and eventually replaced.

Here replacement parts for most flat panel TV models:ShopJimmy.

See also: PartStore

Regards.

Ginko.

Some components are getting heated up most probably in the sound section due to high voltage. Either there is a failure of regulated power supply to that are or the IC or other components in the board are defective. This is a case to be handled by a qualified service technician, as the back cover has to be opened.

hi;
first try to check power cord if still good,
maybe some capacitor has bloated or changed value, try to watch this http://www.youtube.com if you know how to solder, or even disassemble the back of LCD TV. if not try to call a repair technician. thanks ,, hope this help........

In most cases when the CD does not play it is possible that the optical head is a suspect. Sometimes it might pick up ordinary audio CD but will not play other formats. This indicates that the optical head is weak and so there is no detection or scanning of the CD . If the optical is working the tracks will be read immediately but with no scanning the laser head can be defective.

The main motor will not work in some cases as unless the tracks are read the drive motor will not work with signal from the processor. Also in some cases the central motor base can shift and so the distance to the disc can be more resulting in low detection. You can pull up the spindle to come closer. Sometimes certain cleaner disks will not be tracked to run for cleaning as it will not be read and so will reject. Hence it is ideal to manually clean the laser head eye using a cleaning swap /cotton bud with gentle pressure on the lens eye.If there is no result then watch if the CD spins or tries to spin. If so the board seems to work unless a test is taken on the main board but the possibility of a defective optical head can be the suspected fault.If any of the above seems otherwise we must recheck with possibilities of a malfunction of the main processor board

The plasma screen is literally burned down - used up, worn out, whatever you want to call it. This is a sign that the screen is near death due to its age and not a defect. There is nothing that can be done to save it, the tv is dying.
Time for a new one.

The surge may have scramble the mother board, try unplugging it for about an hour to let it reset itself, if that does not work, then you may need to replace the main board.

If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on: Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Parts: www.shopjimmy.com Parts: www.interliquidparts.com Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps. Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.

Your best bet is likely to be Amazon.
If you can't find the specific one for your player they do sell a variety of 'universal' in car chargers for all sorts of electronic devices with a selection of inter-changeable end connectors to suit your equipment.
The charger socket on your player should have a symbol on it to indicate polarity (whether the pin or sleeve is positive or negative) it should also show the correct voltage required - check that any charger you buy covers that voltage range.

HYUNDAI HU-TV2121 processor N403 KALORA HHEN16MD01.Videoprotsesor LA76810A - the very bottom hidden button (right of the circuit), click once highlighted FACTORY. More P + and P-switching options.

HYUNDAI C2910, C2519, C2988
1. Set the volume -0
2. Press the remote button "MUTE"
3. While holding "MUTE", press "MENU" on the front of the TV.
4. On the top right corner will light up the letter "D", and in the left corner shows an adjustable parameter and its value.
5. Pages menu change button "CAL"
Switching parameters conducted green and red buttons on a blue field panel. Change made a yellow and blue buttons on a blue field.

HYUNDAI H-LCD2000
To enter service mode simultaneously press "MENU" and "STANDBY".
Press "MENU" again.

HYUNDAI, ITT 29M03 C2131 chassis CPU M37160M8-064FP
In the main menu code 6, 4, 8, 3.
Tools submenu contains the switch to the next of which is done by putting 6, 4, 8, 3.

HYUNDAI 359, 387, 8FHIFI, CB5373Z, 6578F processor CCU SEL04 / SEL07A
Mode 1: Close contact in the hole near the keyboard and just press "S"
Mode 2: Close contact in the hole near the keyboard and just press "S" again and click on contact. Exodus - LOAD.

HYUNDAI processor SAA1293-03-03 SAA1293A
With remote control TV "Horizon" graphics without clicking "SERVICE", the indicator shows a CH, a paz-click on 'appears OP, then choose the volume of registers numbers "1-4" and numbers "1-9" change bits. Then click on "Memory" (you can also lock the pins 15 and 23 in the control circuit SAA1250). Exodus - POWER OFF.

HYUNDAI chassis CCU11 - "•?" (C) (H)
Chassis CCU12 - close contact in the hole near the keyboard and just press "S". Exodus - LOAD.

HYUNDAI chassis M1, ITT, NOKIA, SALORA 6390, 7190, MV4000, PL14 24 101 852 SAT SOLI, 882 SAT SOLI, 885 SAT SOLI processor CCU-SALO-07 (CCU20XX)
entrance "C"> "*"> "O / V"> "#"> "M". Exodus - "power".

HYUNDAI chassis EUROSTEREO-1. DIGIVISION 1963 .. 2, 1971 .. 2, 2 .. N6 processor NES3-... NES2-..
Log "-/--" "MENU" "TV" - for a second. Exodus - POWER OFF.

HYUNDAI chassis STEREO PLUS. 5575SFN, 28T7 processor ST92T93
Entrance - "i" "M" "P +", output - TV.

HYUNDAI 3875EX DIGIVISION
Gun "AV7 universal" fully fit.
Sign in service "1-/11. (Button with painted upper corner). TV must be turned on and display a feed.
Recommended initial value: V.AMP-027. V.LIN-038. S.COR-020. V.POS-023. H.POS-041.H.AMP-022. P.TILT-013. P.AMP-024. P.CORN-007. GREEN-032. RED-032. BLUE-032. V.BRE-005. LUM.DEL-000. AUDIO-032.OPBYT1-002. OPBYT2-064. OPBYT3-000. PRLOSK-000. RESERVE-000. Writing in memory - click "E".
Memory 24c08 can put a clean, turn on TV it propyshe processor itself.

from electronics-planet .blogspot

I was told it is the deflector curcits, HOT, Horizontal IC