20 Most Recent Jet Tech Systems CHALLENGER Dishwasher - Page 7 Questions & Answers

North American website, we speak English.

Moved from Computers, to Dishwashers

Dishwashers | Answered on Nov 10, 2019

you run some bleach water thru it and leave it alone they break when disassembled

Dishwashers | Answered on Nov 09, 2019

Not sure, however there is a round thing on the inside bottom of your dishwasher. It looks like a air hockey handle. Try easy to push it up and down. This is the dishwasher float. Then try running it again.

Dishwashers | Answered on Nov 09, 2019

Moisture has gotten into the electronics in the door. I suggest unplugging or turning the breaker off. Open the door and let it dry at least a day. The problem is figuring out where moisture is getting into the door.

Dishwashers | Answered on Nov 09, 2019

In many cases the dishwasher will stop draining or draining fully due to a clogged drainage hoses or due to an object caught in the draining pump. There are some cases when the draining pump is faulty and needs to be replaced. We have assembled the top issues to check for a dishwasher that does not drain.
Drain Pump: The drain pump pushes water through the drain hose. If the drain pump motor is malfunctioning the dishwasher will not drain. Drain pumps can be checked with a multimeter. If there is no continuity then it must be replaced with a new part.

I got this info from:
Check it out for more help with your dishwasher issue.

Dishwashers | Answered on Nov 07, 2019

ER code Means a button was possibly pushed in or stuck for more than a minute. Check buttons, if capable check keypad connection. If neither of these seem to be the issue I suggest replacing the keypad. Most likely a technician will have to perform this procedure.
I hope this information helps. Have a blessed day.

* Always unplug any appliance you are about to work on before attempting to disassemble!

Dishwashers | Answered on Nov 06, 2019

Possible faulty board. It seems it telling the water to drain in the first cycle however not sending the signal after the rinse cycle.

Dishwashers | Answered on Nov 06, 2019

Open the dishwasher door, all the way. Look to the front right, this is the location on many models. You will see a round looking thing. Try to push it down and up. Do not do this very hard. This is the float that tells the dishwasher not to add any more water or to add water.Try running the dishwasher after this and try a few times.

If that doesn’t seem to work then it most likely is going to be the water inlet valve is faulty.
I hope this information has been helpful

Dishwashers | Answered on Nov 06, 2019

I would recommend calling a service tech. At six years old if used everyday or even every other day it my be time to consider replacing it. The technician should clue you in on the cost of the repair. It may be just a simple fix.

Dishwashers | Answered on Nov 06, 2019

Do you mean that the control panel doesn't work at all, or that the micro-convection oven works, but the light stays on?

At a guess, the switch that tells the oven that the door is open is stuck in the "open" position, and therefore the light is on and the oven will not start.

Parts here

Dishwashers | Answered on Nov 03, 2019

Not finding what you are looking for?
Jet Tech Systems CHALLENGER Dishwasher Logo

Popular Tags

1 questions posted

Ask a Question

Usually answered in minutes!

Top Jet Tech Systems Dishwashers Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Brad Brown

Level 3 Expert

18338 Answers

ray gallant

Level 3 Expert

67926 Answers

Are you a Jet Tech Systems Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jet Tech Systems Dishwashers

  • Jet Tech Systems Dishwashers

Most Popular Question

dishwasher not dry

  • Dishwashers