20 Most Recent MTX (SLH-T7512X2-A) Car Speaker - Page 7 Questions & Answers


you need to change your remote wire to a switched 12volt source, not a constant, run it to your ignition fuse

MTX Car Audio &... | Answered on Aug 16, 2009


had a friend with same problem...paid me to look at it and well...amp was just overheated or short/loose ground.

MTX Car Audio &... | Answered on Jul 02, 2009


I hesitate to answer this question for fear that you will not like the answer even if it is the truth. I have received a bad rating from a couple of people in the past just because the right answer was not what they wanted to hear.

This is a mono sub-woofer amp, which means that it is already bridged internally. You only have one speaker output in this amp, that means that the amp circuit is bridged inside, it is not split into two channels.

To bridge any output, it requires 2 channels, otherwise there is nothing to bridge.

I have been repairing car amplifiers for over 18 years, and I promise you that there is no way to bridge a single channel amp. Bridging means to convert 2 channels into 1 channel. If all you have is one channel, then there is nothing left to bridge.

I hope this explains it for you, if you have any other questions feel free to post them here and I will answer as soon as possible.

And please do not punish me with a bad rating if you do not like the answer, it is the correct answer, and sometimes the right answer is not always what we want to hear, but it does not make it wrong.

Dave

MTX Car Audio &... | Answered on Nov 09, 2008


There are several things you can check. Do you have a multi-meter?

MTX Car Audio &... | Answered on Aug 26, 2008


connectors on the rca's are bad. need to be changed out

MTX Car Audio &... | Answered on Jul 13, 2008


i have seen the jackhammer at autobarn moss street slacks creek brisbane qld not sure if it is 12000 watts but looks massive you could also try gold coast car sound brisbane qld

MTX Car Audio &... | Answered on Jun 30, 2008


what amp are u usin?What enclosure 4 speakers do u have?Might not have enouigh voltage 4 the amp.How big are the wire for power 2 amp?what ohm are you playing ,is it compatible to the woofers.Need more info.Model and makes please,but 1st a rating.

MTX Car Audio &... | Answered on Jun 16, 2008


check you spkr wiring in put if they are cross

MTX Car Audio &... | Answered on May 26, 2008


Try this. Turn the ignition on, with the engine off. Turn on the radio. Press and hold button 4. The display should change. Use the Tuning buttons to enter the code. (I think its up/down to change the numbers). Enter the first number and press button 5 to confirm. Use the tuning buttons to move along to the next number, (i think it's left/right for this bit). Repeat the method for the first number, (Set number then press five to confirm). Once you enter the last digit the display should switch back to the normal display and be ready to use.

Car Audio &... | Answered on Oct 19, 2020


It would be best if you pull the fuse panel off while your car is switched on. Pull the fuse out for about a minute! Then put the fuse back and push the power button. I hope it will solve your problem.

Car Audio &... | Answered on Oct 15, 2020


How to change japanese to english language radio VXH-089CV

Car Audio &... | Answered on Oct 14, 2020


here you go .

http://www.gps-guru.com

Car Audio &... | Answered on Sep 28, 2020


check there...

http://www.gps-guru.com

Car Audio &... | Answered on Sep 23, 2020


Make sure take voltmeter and test wires before you make any connections. In some modern (boats, cars etc) applications YELLOW is NEGATIVE (used to be memory).

Car Audio &... | Answered on Sep 16, 2020


Do you know the make and model of the radio?

You state that you are trying to unlock the radio, but at what stage are you:

1) Do you have the security code and you are just trying to enter it?

2) You do not have the security code and you are trying to get the radio serial number?

3) Something else?

Car Audio &... | Answered on Sep 07, 2020


i chane NDDA w56 language
to english

Car Audio &... | Answered on Sep 04, 2020

Not finding what you are looking for?
MTX (SLH-T7512X2-A) Car Speaker Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top MTX Car Audio & Video Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Tom Chichester

Level 3 Expert

59195 Answers

Are you a MTX Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MTX Car Audio & Video

  • MTX Car Audio & Video

Most Popular Question

subwoofer only works when weather warm

  • Car Audio & Video
Loading...