20 Most Recent MTX (SLH-T7512X2-A) Car Speaker - Page 3 Questions & Answers

you can put them in one box you will need a good port hole if you do.How to build subwoofer box

this link is on how to hook up speakers Subwoofer wiring diagrams \

good luck

MTX Car Audio &... | Answered on Nov 14, 2015

the light stays on because the amp is still storing power. it only turns off when the capacitors on the inside have drained off all the extra power

MTX Car Audio &... | Answered on Nov 14, 2015

Get a speakers to line input adapter and that will do the trick.

MTX Car Audio &... | Answered on Oct 28, 2015

If you bridge the amp and get 1000 watts RMS and that is split going to two speakers then you will get 500 watts RMS at each speaker. If you have your amplifier on maximum gain it may blow your speakers, not because they are overpowered but because you might run into "clipping" issues running the amp at maximum capacity. Just to be safe I would dial the amp's gain down to 3/4 of the way to full gain. That should give you ample power and keep your amp from clipping and running hot.

MTX Car Audio &... | Answered on Sep 02, 2015

First check your fuse by the battery then on the amp, if they are good then try another speaker

MTX Car Audio &... | Answered on Jul 16, 2015

Not sure about getting a better view but I suspect that you have more problems than just replacing the resistors. Like what caused the resistors to burn?

MTX Car Audio &... | Answered on Apr 30, 2015

This problem is caused by one or more of your output devices (FET, Transistor, or IC) is shorted and causing the power rail to be connect through your speaker. Your amp boosts the 12v supply to a much higher +/- voltage rail which powers the amp's outputs. When the amp is shorted or overheated to a point of destruction you can end up with this problem.

It will need to be repaired by a technician.

MTX Car Audio &... | Answered on Mar 04, 2015

what do mean by "Those"?

MTX Car Audio &... | Answered on Feb 14, 2015

Go MTX's website

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_aad3edb7dfa380b9

MTX Car Audio &... | Answered on Jan 07, 2015

any dc voltage at amp output is a sign this is blown. the problem is on the output transistors and can only be fixed by a technician

MTX Car Audio &... | Answered on Oct 25, 2014

this link has install sheets just match the model number of you amp to the list of mtx amplifiers to find appropriate wiring diagram

MTX Car Audio &... | Answered on Aug 13, 2014

Broken or loose PTO belt, or PTO shifter linkage.

MTX Car Audio &... | Answered on Aug 10, 2014

Not finding what you are looking for?
MTX (SLH-T7512X2-A) Car Speaker Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top MTX Car Audio & Video Experts


Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76455 Answers

Tom Chichester

Level 3 Expert

60232 Answers

Are you a MTX Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MTX Car Audio & Video

  • MTX Car Audio & Video

Most Popular Question

subwoofer only works when weather warm

  • Car Audio & Video