20 Most Recent
- Page 8 Questions & Answers
Konig tripod - can't get quick release plate off
I had the same problem a few minutes ago. You don't need to unscrew any of the fixing but make sure the larger silver bolt is not tight. The instructions are: 1. Use your thumb to push down the silver lever to the left of the spirit level. 2. Whilst holding this lever down slide the top of the top of the quick release mechanism to the right (looking at the spirit level) and it should come off. Once you do it you'll know how much force to apply in future. If this doesn't work try loosening the large bolt a little more. You can safely remove it, but remember to replace it as it is used for locking the quick release. Note that the locking only starts after this bolt is turned 2-3 times, before this the quick release should work fine.
on Oct 28, 2018
HOW DO I THREAD THE FILM IN?
Easiest way is to follow the instructions in the camera manual. If you tell us which camera you are using, we may be able to offer more detailed information. BTW, there is no need to shout.
on Oct 26, 2018
Not finding what you are looking for?