20 Most Recent Aspire Digital AD-1000 DVD Player Questions & Answers

0helpful
1answer

Remote code

yes you need to read the manual
12/31/2011 7:01:45 AM • Aspire Digital... • Answered on Dec 31, 2011
0helpful
1answer

How to hook up DVD

you should have a avi pcmcia card in your laptop or else you can purchase and insert it yourself.
check this pic you can understood
http://www.eprous.com/includes/images/pcmcia-tv-big.jpg
8/31/2010 4:50:14 AM • Aspire Digital... • Answered on Aug 31, 2010
0helpful
1answer

DVD player Model AD-1000. No video using composite

When using Component Video you MUST use AV for the Audio in ALL circumstances. Connecting this up will be easy. What you do is get a yourself a set of the right, for your setup, cables. That uses EITHER one of the formats, of these described, below. You will need, either, a THREE way Cable, or three separate " Coaxial Cored" Cables with RCA PLUGS on them. ColoredYellow, (Video) Red, & White. (Audio) AV. OR If you have SCARTConnection Sockets, it's a big Black Socket at rear of unit(s), you get aSCART Cable.& It's all inside. Now some units, use a standard calledComponent Video, that uses, a Green, Red, & Blue Plugs. Now, with the Component setup, you will also ,need, Two more Cables, for the AV Audio. these are, Red & White.(So with Component Video there are 5 Cables/Plugs in all). In any event ALL Cables go Color to Color, at each end, plugging into the corresponding Colored RCA Jacks, on either machine, or VCR or TV. Now if you have SCART, then it simply plugs in only one way. It is that simple. So connect up with the leads your set uses, and select the correct "Input" from TV/Remote, it is NOT on a "Channel" it will be on AV, AUX, and Press "Play" on VCR/DVD whatever.... should be all go.
3/3/2010 2:19:51 AM • Aspire Digital... • Answered on Mar 03, 2010
0helpful
1answer

Dvd tray won't open dvd stuck

I had this happen when someone put a DVD in the tray when there was already one in there. I managed to pry the tray out to retreive the DVD's, but when I closed the tray it was stuck for good. I wouldn't bother doing this because you'd probably have to take the player apart for it to work again anyway.
I took it apart and found that the gears were thrown off from the jammed tray. If you have some mechanical ability, you should be able to see where it is off track. Most likely you would just have to snap the gears back in place, hopefully none of them broke. Also, when you have it apart, you can manually open and close the tray part to assure that it's corrected.
8/22/2009 6:55:43 AM • Aspire Digital... • Answered on Aug 22, 2009
0helpful
1answer

Remote Codes

Have you tried using codebases for other companies? It isn't uncommon for a company to re-brand another's hardware.
9/26/2008 9:24:21 AM • Aspire Digital... • Answered on Sep 26, 2008
0answers
0helpful
1answer

All of a sudden the

Check the connections between the DVD player and the TV. If using RCA cables, replace them, as one may be defective. If using S-video, check its connection is secure. It is probably just a bad cable connection or in the case of the standard yellow-white-red RCA, this is probably defective at its sealed plug points - replace this.

If checking/replacing cables does not fix the issue, the DVD player and/or TV may require workshop attention, which could prove costly. I hope it's just something simple, like bad cables/connections.
4/19/2011 3:18:16 AM • Aspire Digital... • Answered on Apr 19, 2011
0helpful
1answer

How to order a replacement remote control for

It might be more expensive than the dvd player but try this link: http://remotes.com/store/aspire_digital/ad5807a.html. good luck!
1/31/2010 1:20:20 AM • Aspire Digital... • Answered on Jan 31, 2010
0helpful
2answers

CD disk is plays, but DVD disk in no playing,,sometimes dvd plays,mostly no disk

try cleaning the laser lense If you have a dirty lense it can still read cd because data is not as compressed on dvd, each byte of data takes up far less space on a dvd so the dirty lense might not pick it up whereas it might pick it up on a dvd
12/7/2021 2:50:19 AM • Televison &... • Answered 9 hours ago
0helpful
3answers

How do I play a disc?

A regular DVD will not play on a BluRay player and a BluRay will not play on a regular DVD player. There are DVD/BluRay Combos available in both the DVD and the Player. You will need one of the correct combinations to play the DVD in question
12/7/2021 2:46:22 AM • Televison &... • Answered 9 hours ago
0helpful
1answer

Turning on machine and can't move control dial or turn on

'can't move control dial'. That doesn't sound like something for the 'Television and Video' category Susan! make model (what it is) in all questions please :>D
12/6/2021 6:37:30 PM • Televison &... • Answered 17 hours ago
0helpful
1answer

Miele dishwasher heater relay

I'd stick to what's in the dishwasher to avoid issues
12/6/2021 6:37:13 PM • Televison &... • Answered 17 hours ago
0helpful
4answers

Seiki tv keeps turning off how do I fix it

try plugging your tv directly to the wall outlet and bypassing your power strip. let me know if this helps !
12/6/2021 6:37:10 PM • Televison &... • Answered 17 hours ago
0helpful
8answers

My dvd player is saying

Check it another dvd...Turn off for few minutes and then try it
12/6/2021 6:36:56 PM • Televison &... • Answered 17 hours ago
Not finding what you are looking for?
Aspire Digital AD-1000 DVD Player Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Aspire Digital Televison & Video Experts

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Jerry Kramer
Jerry Kramer

Level 3 Expert

3914 Answers

Are you an Aspire Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Aspire Digital Televison & Video

  • Aspire Digital Televison & Video

Most Popular Question

remote code

  • Televison & Video
Loading...