20 Most Recent
Questions & Answers
Astar tv will not come on
If the problem is same with different input devices and you have ensured there are no loose contacts in power outlet, RC jack, cable and sockets, the TV needs servicing.
Connect computer through hdmi
the computer and tv both should recognize that the hdmi is connected, if Its an add on card then try to uninstall, then reinstall drivers for it. I know windows 7 and I beleive vista automatically cofigures the display, on XP you may have to go into the display settings and click on Identify, then select the display to use.I dont know about Mac or linux, But the last linux software I ran did just fine picking up the HDMI signal.
Blue tint on face
try to play a dvd movie or any recorded TV show first to determine if
the problem is on the TV or on the TV signal/cable reception..
I need to know the results to go for the next step of troubleshooting..
Just add a comment to post your response..
Thanks for using fixya,...
Have a nice day!!
No sound on AV2.Picture is
The RCA component cable set u are using have problems, damage the Audio connections input RCA AV connections RED WHITE cable probably have shorted out.Go to Radio Shack buy new set of RCA component cable for the replacement.
My picture is not working but the sound is. I
Tv turn on now have a picture flashes only a few sec. than dies have sound left only.Yes,than the tv dose have dead long LCD inverter backlight board.Should go on the website Shopjimmy.com to buy the refurbish LCD inverter board for the replacement.
How do I scan the
Hello, R you connect to the cable box? or loco chanels? call 323-868-3303 i will go through with you.
Not finding what you are looking for?