20 Most Recent Denon AVR-4802 Receiver Questions & Answers


Problem with the Denon AVR-4802

you need to find a headphones, put a drop of contact cleaner on headphone plug and plug it into receiver's h/p input several times. It cleanes internal h/p connector contacts and unit will work fine. If doen't help the receiver most likely has bad h/p connector soldering.
3/30/2014 10:23:36 PM • Denon AVR-4802... • Answered on Mar 30, 2014

Denon AVR-4802

Be the first to answer 11/16/2013 11:10:24 PM • Denon AVR-4802... • Posted on Nov 16, 2013Be the first to answer

My denon 4802 had started

Disconnect the speakers a nd see if it's capable of staying up. If so, look for an external short. Otherwise, it needs a hands-on tech.
2/2/2013 2:40:02 PM • Denon AVR-4802... • Answered on Feb 02, 2013

I have a denon avr-4802

Register and download the manuals for free at retrevo.com



Page 10. The S-302 uses a proprietary D-Sub25 system cable to the DSW-S302 subwoofer. Don't know if or why it has more than 2 active conductors. The other speakers have removable cable ends so they might work just fine.
4/24/2011 7:40:49 PM • Denon AVR-4802... • Answered on Apr 24, 2011

I'm buying a 1080p blue

Hi - If you mean can you run/switch a 1080P video source through the receiver, then the answer is no. It can only switch through the video component connectors on the receiver (1080i) but it's not a problem you can just connect your new BR player directly into the TV (HDMI) and have the audio handled by the receiver. It's a common setup and you're not really losing anything. It's the setup I have.
Enjoy your new great BR experience!!

Regards, Mikeywaf
3/2/2011 3:38:51 AM • Denon AVR-4802... • Answered on Mar 02, 2011

On screen display not working!

Is the Projector attached to a monitor output on the receiver?
2/6/2011 9:23:30 PM • Denon AVR-4802... • Answered on Feb 06, 2011

I have a pair of

check if left speaker is shut off /connections one speaker my be on a side the other on b side check all speaker connections
1/3/2011 11:09:59 PM • Denon AVR-4802... • Answered on Jan 03, 2011

Have a avr 4802 nothing

open her up and see if there is a inner source of power maybe like battery for the memory, if there is none while unplugged try to short every capacitor in the unit

but first try the denon web site maybe they have some things you try

and if its in warranty then call denon
10/10/2010 12:40:16 AM • Denon AVR-4802... • Answered on Oct 10, 2010

I have a Denon AVR4802R receiver/home theater amp

hope this helps yammandan or email me and will send you it...
8/20/2010 12:22:03 PM • Denon AVR-4802... • Answered on Aug 20, 2010

I have two devices that I want to hook up to coax

Swap one end of the cables for the devices between #1 and 2 to see if it's the device or the cables. Proceed to isolate the problem further from the results.

Optical cables are finicky and must be clicked in while also making sure there are no small-radius bends anywhere in the cables.
1/21/2010 4:16:09 AM • Denon AVR-4802... • Answered on Jan 21, 2010

Can not set-up surround speakers

Hi and welcome to FixYa,

Initially, have you tried a full / hard RESET of the Denon AVR-4802? Doing so would allow you to start clean/fresh reverting to factory defaults and remove any glitches, errors in settings, configuration including memories, presets and user preferences. If have not been tried:
  • switch OFF the AVR-4802 and unplug from the wall outlet;
  • press and hold the DIRECT buttons and stereo button;
  • without releasing the buttons, plug the unit back into the wall outlet;
  • release the buttons only when the display is blinking.

Offhand, should the above be not corrective, then it would be a hardware fault on the power outputs of the amp designated for the surround. Options then are:
  • consider a DIY (do-it-yourself) repair if and only if very familiar with electronic components & circuitry, use of a DVM/VOM, a soldering iron/station and safe working practices with electrically powered devices. Access to a Service Manual or at the very least, a schematic diagram would be a necessity;
  • should you be uncomfortable with a DIY, perhaps your best bet would then be to seek the services of an authorized Hitachi Service Center or a qualified professional.

Good luck and thank you for asking FixYa. Happy Holidays.
12/27/2009 4:05:47 AM • Denon AVR-4802... • Answered on Dec 27, 2009

AVR-4800 - After 30 min audio goes out all channels just hum/buzz

if it is under warrantee then fix it.
sounds like a component is over heating, probably cost couple hundred (or more) to fix it, balance that with what you paid.
4/29/2009 12:24:55 AM • Denon AVR-4802... • Answered on Apr 29, 2009

Changing the component input to composite or s-video output

It will not work. This unit can not convert video signal from component to s-video. Use the same type of connections on DVD and TV.
4/12/2009 2:00:58 PM • Denon AVR-4802... • Answered on Apr 12, 2009
Not finding what you are looking for?
Denon AVR-4802 Receiver Logo

Popular Tags

34 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Denon Audio Players & Recorders Experts


Level 3 Expert

5750 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Morne Olivier
Morne Olivier

Level 2 Expert

265 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Denon Audio Players & Recorders

  • Denon Audio Players & Recorders

Most Popular Question

buying 1080p blue

  • Audio Players & Recorders