20 Most Recent Abit IC7 Motherboard Questions & Answers


Not booting

clean memmory contacts with a cotton cloth and clean memmory slot with a clean small soft brush...... then switch on smps
9/30/2013 9:06:45 PM • Abit IC7... • Answered on Sep 30, 2013

No sound from my pc, it have a biostar mother

1.check the speakers.2.check the speakers cabels.3.I/O-shield lightgreen contact is AUDIO OUTPUT.4.go to services and RESTART WINDOWS AUDIO.
9/19/2013 3:18:19 PM • Abit IC7... • Answered on Sep 19, 2013

Manual abit ic7

Be the first to answer 6/19/2013 3:00:58 AM • Abit IC7... • Posted on Jun 19, 2013Be the first to answer


The front of your computer is the Front PanelThe area of contact pins on the motherboard, that the Main wires go to from the Front Panel; is the Front Panel headerhttp://www.ebay.com/itm/ABIT-Computer-IC7-Socket-478-Intel-Motherboard-w-Pentium-4-3-0-GHz-CPU-/171034074235?pt=Motherboards&hash=item27d26cdc7bMotherboard installed in computer case, the Front Panel header is on the Bottom/Right corner; and is White it color.Two rows of contact pins.(I like the Zoom In feature. Just set your mouse cursor in the middle of the photo to activate it, and then move your mouse cursor around)Looking at the two rows of pins, you will see there are some missing in the middle.Essentially can be said as having pins on the Left, and pins on the Right.It is my belief that the pins on the Left side, are what you want.Number the pins across the Top rowLet's start at the Left side. Pins 2, 4, 6, and 8.Now number the pins on the Bottom row, Left side.Look like there may be four pins, so number from the Left,Pins 1, 3, 5, and 7.It is my belief that;Pins 2 and 4 are for the Power On LED lightPin 2 being for the Positive ( + ) wirePins 6 and 8 for the Power On switchPins 1 and 3 for the HarDDrive activity LED light. (HDD LED)Pin 1 for the Positive ( + ) wirePins 5 and 7 for a Reset switchI think the pins on the Top row/Right side, may be for a speaker.A lot of times though, these pins are not even used.One pin may have been a 5 Volt test area for the factory.Other pins may be for technology that isn't used today, or used readily.Such as Infrared Remote, and so on.(Huh! Always thought Infrared was spelled Infared.Good Ol' spellcheck)I would SUGGEST, using a 2-wire LED to check my theory.For additional questions please post in a Comment, or Reply; at end of solution.Regards,joecoolvette
5/7/2013 6:00:38 PM • Abit IC7... • Answered on May 07, 2013

Computer stays on but display will not stay on

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your ((motherboard to your hard drive)) make sure they have a secure connection and are not faulty or just replace them they might be faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electical extensions even something as small as an electrical fan and its lead can cause this problem or just replace them they could be faulty a computer needs all electrical power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error

make sure your graphics card is securely seated with no dust built up or in the socket

if you remove your graphics card restart your computer reinstall it should activate found new hardware wizard

hope this helps you

8/31/2011 3:32:51 AM • Abit IC7... • Answered on Aug 31, 2011

Were do i put the jumpers


I answered a similar question on this post a couple of minutes ago.

See if it works for you.

God Bless You!!!

Hope it helps.

Remember to rate solutions, to keep fixya working for you!!
2/21/2011 5:30:11 AM • Abit IC7... • Answered on Feb 21, 2011

I get a long beep then a pause and the beep reats.

More info here

2/4/2011 11:28:13 PM • Abit IC7... • Answered on Feb 04, 2011

Have an Abit IC7 motherboard in a system given to

1) The bracket is a simple push fit one - it just pops in and locks in there when pushed.
2) Simple test (assuming that the processor , video card and the memory have been tested in another motherboard and are good): remove all the disks and try to start it up into the BIOS - if you can't then the problem is in the motherboard. As a last hope reset the BIOS and remove the battery for one hour. If it doesn't starts even after that then the board is dead.
The DVD burner will power up and seek even if it's not connected to anything else - all that it says is that the unit is working normally.
12/16/2010 8:20:37 AM • Abit IC7... • Answered on Dec 16, 2010

I forgot my parenal lock

I would suggest simply resetting your board either with the jumper or by pulling the battery.
12/16/2010 5:11:20 AM • Abit IC7... • Answered on Dec 16, 2010

Desert Combat 9.0 Map Dosen't Load

Here is some great PC solution by Some FIXYA EXPERT. Get any kinds of PC solution from bellow.

  1. Intel MotherBoard
  2. Mercury Motherboard
  3. Gigabyte Motherboard
  4. MSI Motherboard
  5. P5GC-MX/1333 Motherboard
  6. via

7/19/2010 11:58:43 PM • Abit IC7... • Answered on Jul 19, 2010

We dont get our toshiba m2 tecra vga driver and


Thank you for your query

Please see the link below for the drivers requested


I hope this has been useful
3/12/2010 11:21:32 AM • Abit IC7... • Answered on Mar 12, 2010

How do I reset bios on this motherboard? I've

This link to Abit will get you the manual for the IC7-MAX3 board, which may what you need.

If by resetting BIOS you mean clearing CMOS, just remove the battery.
2/14/2010 1:15:54 PM • Abit IC7... • Answered on Feb 14, 2010

No sound and i have no disc

though itz unclear to me of wat os u r using..
assuming that u r using win xp pro sp2..n directx installed..
check if Audio device is enabled in bios..

howevr, download microsoft kb888111update n install it..u need to re-install or update the devicedriver (may b manually)..logon to internet n seek the package/audiodriver..along wid the company, there will b a list of such site ndriver downloadlinks if u search by the model name on a search engine (like google)..


downloadthem onto a location; if the driver is in a zip format, unzip it,if itzin .exe form, just run it; if done manuallyit'll ask for the correct driver and location; relocate the path and a.inf file (wat it'll ask for)....goto the device manager n verify, ifinstalled properly..!!
also download n install "k-lite mega codec pack"....

ifnot fixed try using a standby pci snd card (in such case it'll b aconfirmed case of ur system board is likely to b defective)..

but always better to consult ur system admin/vendor....
11/12/2009 8:02:44 AM • Abit IC7... • Answered on Nov 12, 2009

Hi there,

remove battery on motherboad
remove rams clear the rams slot..

add the rams without battery

start computer if problem continuous replace ur rams....
10/23/2009 2:15:55 PM • Abit IC7... • Answered on Oct 23, 2009

Unable to get ethernet controller drivers

Go to the Toshiba web site support page. Haven't personally been there but I assume you should reply to a few questions about your equipment model, serial number, etc, before it leads you to the download page. Once found, download the driver, save to your disk for a possible future reoccurrance, and run the install.
Good luck!
8/16/2009 11:07:26 PM • Abit IC7... • Answered on Aug 16, 2009

Need ethernet drivers

abit has a great site for this here is yours
8/14/2009 3:26:20 AM • Abit IC7... • Answered on Aug 14, 2009
Not finding what you are looking for?
Abit IC7 Motherboard Logo

Popular Tags

32 questions posted

Ask a Question

Usually answered in minutes!

Top Abit Computers & Internet Experts


Level 2 Expert

691 Answers


Level 1 Expert

8 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you an Abit Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Abit Computers & Internet

  • Abit Computers & Internet

Most Popular Question

no sound no disc

  • Computers & Internet