20 Most Recent kawasaki Dual 7" Diag. LCD Portable DVD Player Questions & Answers

If it's really not spinning then it's possible you have a shorted spindle motor, common problem. Another possibility is that the motor isn't getting enough power to start the spin. You should check that the power supply is up to specs, if you have the equipment. If not better take it to a lab. Good luck

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Google it and ye shall find

hi...if you only find it hard to turn your player ON when plugged, lets do this few easy steps in tracing down the problem...check first the power cord if there's an indication of cut / burn wire.. if no check if there's a blown fuse...if there's one try to replace w/ same value..blown fuse sometimes caused by power fluctuation or you have a defective parts in the power supply section..in the power supply area check for any bloated or bulgy capacitors, if there's one replace w/ same value..also check the manual ON switch if it's still intact....test run....hope this help you...don't forget to rate and vote...good day..

hello,clean the dirt on the laser eye, if it dosnt help change it

Hi, Unfortunately, this blue screen of death indicates a hardware failure. You need to get the unit repaired. However, looking at the cost of the new players, it is not recommended to get it repaired. That's something different if you want to get this fixed as you want to gain some knowledge or experiment or have taken the task as a challenge. If you wish to repair, you need to have some electronics background to read schematics,should know soldering and would be able to keep all precautions. If you want to get it fixed by DIY ( do it yourself ), you could revert and i would be glad to follow up. Let me know,if needed further assistance. Hope i helped you. Thanks for using ' Fixya ' and have a nice day!!

After checking with a number of parts replacement sites unfortunately it doesn't look like anyone is stocking replacement screens for your particular model. A number of them do stock parts for model #'s (all start with PVS unless otherwise noted) 10921, 1963, 1665, 32801, and 1080. None of those is a direct replacement for your model.

Another avenue to explore would be to find a used unit like yours that you could strip for parts. I wasn't able to find any listings in any of the North American sellers sites including the big one such as eBay and Amazon. As this model was sold in Europe you might want to try some of your local websites. I must apologize for not being able to provide you with better news.

These are common symptoms for all DVD players. Common causes are damaged/dirty discs or dirty laser lens. Also, if the disc is a burned disc, instead of a factory-pressed one, there can be problems. Not all brands and types are created equal. DVD+R vs DVD-R, for example, can make a difference, and so can the manufacturer.

The most obvious reason is an overheating issue in the Power Supply board. There are other ideas here, but you need to take it to a television engineer to diagnose https://www.google.com/search?q=television+will+suddenly+turn+off+every+4+minutes ..

Check the internet connection. The television can't update if it can't see the internet. Resetting it breaks the previous settings. Just for fun, reboot the router as well and wait 15 minutes until all the lights come back on. Then reestablish the television connection to the router. Harwa is not a make we know here in North America. https://www.google.com/search?q=Harwa+Smart+television.+How+to+restore+Apps ..

general steps: Get the TV remote control and push the "Menu" button and select "Options". Select "Child Lock" from the "Options" list. On some televisions, the "Child Lock" is named "V-chip". Choose the "Remove Child Lock" selection. Highlight this and then hit the "Enter" button. Enter the four-digit code that you used when you activated the child lock feature. If you cannot remember it, your only option to deactivate the child lock is to reset the TV. The instructions for resetting a TV is written on the user's manual of the TV. Exit the TV menu once you have entered the four-digit code. To do this, press the "Exit" or "Menu" button on the TV's remote control. If you don't have a remote, you might try leaving the TV unplugged overnight. Some TVs will 'forget' their settings if left without power for a long period. You could also potentially buy a cheaper universal remote, and use that to turn off the child lock.

To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps: Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly. Switch on your TV: Ensure your TV is turned on. Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice. Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted. Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list. Bed.-Anl. H2 Version1 (ruwido.com)