Top 20
Maxent MX-42HPM20 42 in. Plasma HDTV Questions & Answers
Maxent 42 inch TV Keys locked and Remote will not work
See if you can reset the electronics to factory defaults. Also check with the mfg about this. If nothing works you have one sick puppy on your hands.
Try this - turn set on then pull the power plug. Then push and hold the power button to on position for a few minutes.
Release button and plug back in Turn on and see what happens.
9/21/2017 8:00:04 PM •
Maxent...
•
236 views • 0 helpful votes
The picture is not working
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
5/24/2016 3:07:18 PM •
Maxent...
•
55 views • 0 helpful votes
My tv blinks and appear white lines in the screen.
There are many reasons for this fault. T'Con board, and even display panel should be suspected. Your TV need a through check-up. Contact any service technician. If you wish to get some details about this kind of fault to LCD TVs, check this link.
http://electronicshelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the
brand name and model number to of your set, to its search box, and
press '
Enter' or view it in
Mosaic / Timeslide
option.
10/6/2013 9:06:39 PM •
Maxent...
•
31 views • 0 helpful votes
Samsung Plasma TV PN43D440A5DXZA Problems
Visit the site named 'Electro-help' for
more details. Check this link and
select the site named above. View it
in 'Flip card' option, which can
be selected from the drop down box menu at the left top corner or the display
window. It will make search easy. Some times, the ads attached with each posts
might help you to find the availability of spare parts. There are more than 625
posts to different brand TVs.
8/19/2012 4:21:12 AM •
Maxent...
•
628 views • 0 helpful votes
My computer won't connect to the t.v. through the RGB cable.
same problem with different modles. It worked but only for 5 min. There truely isnt an actual problem from what ive been told. Its both and neither at the same time. TV - res, needs changed and your laptop video card needs a update. Again this is what was told to me by my I.T. guy. HDMI ports do not have this problem.
9/20/2012 7:01:32 AM •
Maxent...
•
109 views • 0 helpful votes
Television
check for bad control or buffer board.
8/18/2012 11:20:03 PM •
Maxent...
•
142 views • 2 helpful votes
Can you turn coax into rca cables since the maxent I have doesnt have a coax input
You can but the connection type is not the problem. If you have Coax cable or antenna type signal you need to put that into a tuner capable of providing the RCA (baseband or composite) video out with RCA audio as well. However if one is going that route with a HD display then the SVHS tyoe connector or even HDMI or some component level cables should be used to get the full benefit of the HD signal.If your HDTV has no Coax input then it is not a TV but a displaydevice more like what is used in computers.
8/9/2012 2:56:55 AM •
Maxent...
•
152 views • 0 helpful votes
Not finding what you are looking for?