20 Most Recent
Protron PLTV-37 37 in. LCD Television - Page 2 Questions & Answers
Trouble with sound and picture
You can probably get an original remote here:
remotes.comIt sounds a lot like you have either an analog signal on a ATSC input or vice versa and this would also prevent audio from being properly processed.
My TV has sound but
Hi pine2349,
This kind of symptoms is an indication that the backlight of your unit is not working.
You have to check the output voltage of the power supply feeding the
inverter board. If it is present, you have to replace the
inverter board, if not, the power supply is faulty.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.
Hardysred light is on and
Hi,
Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
Hoping that will helpout to solve the problem...
Red light is on and
Hello,
Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
I hope this will help in solving the problem...
I have an 37 inch Protron TV, the screen is
Not without a donor tv with the exact same type of screen. These screens are in the low to mid 1000s of dollars just for replacements. The bad news....usually not worth replacing.
Thank you and best of luck!!
NOT ABLE TO CONTROL TV WITH REMOTE OR AT TV. CAN
Looks like the logic control circuits of the tv have failed. But before we arrive at the conclusion, is this a universal remote you are using or the original. If its universal, have you used it with this set before or do not know the right codes to use it with this tv?
Picture in high def does not fill screen
That is normal. Most HDTV's have a format or picture size option on the remote or menu. It will give you options like full, stretch ot zoom to fill in the blank spots. The problem is those settings can also distort the picture size so people look funny.
When turned on at a cold start, sound screeches
I have not repaired this particular models. I have repaired flat screen LCDs, and have seen and heard the problem you describe. You have many, many bad capacitors in the signal board. The signal board is the one with all the RCA jacks and RF connections. You will need an ESR meter to check and find the capacitors that are bad and replace them withe same voltage, Mfs and at 105 degrees. You may have bad capacitor in the power supply. But the majority are in your signal board. You may find up to twenty caps that need replaced. See MCM Electronics.com to purchase an ESR meter. This meter will pay for itself in no time. You may purchase the capacitors from the same company. Replacing the signal board will be quite expensive. So with time and patience it can be repaired. Thanks for asking and show all hands of support!
Menu keeps flashing on off
Hello, to prevent the problem stems from the remote control, you better get him out of the room.
In many cases the reason stems from the front buttons, volume and channels. You must replace all the micro switches. Or replace the board they are connected to it. To replace: You need to put the TV on the screen, remove the rear cover, the panel found out in the open, to remove from his place, should open the two screws. More you need to disconnect the cable from the main Bordeaux. Equipment needed: SOLDERING absorbing tin and tin, to pump the separated legs of the micro switches. So that one can remove them and replace them. In rare cases the problem can be from the main processor circuit
T.V. COMES ON WITH A
CHECK TO SEE IF YOU TV IS SET TO AV OR EXT 1 OR 2 ETC
IN SET UP MENU OF YOUR TV
CHECK SCART PLUGS ARE PROPERLY INSERTED
Yellow light on front is lit and the tv won't
This is due to the power supply. You need a full replacement as Protron power supplies are very difficult to diagnose/repair. Once you replace the power supply you will be good to go!
Please accept and rate if this helped :)
Not finding what you are looking for?