Top 20
Protron PDV-228 Portable DVD Player Questions & Answers
I am looking for a
Hello
The battery of your device can be purchased either from EBAY or ALIBABA. Get into their sites by google. you can order the component, whatever may be; they will have with them. you can buy them by E-payment; and the part will be at your doorstep. OK.
Lack of power cables
For as long as they have the same output voltage and the same polarity, that'll work
I need a charger for mine
The PDV-228 takes a 12 volt DC charge. You should be able to find one at a Radio Shack or other electronics store. Bring it in with you to make sure the plug fits, but make sure it is a 12 volt. You should be able to find either an AC to DC converter, or just a DC plug for your car.
I am able unable to
Check cabling. You might need two cables one into TV box and one out to TV box
Web site has a lot of questions but no answers, what good is it ?
Danglefoot- This unit may be under an unfamilliar name, try taking the battery to a battery shop and maybe they can match the specs.Many batteries have the same connections and output specs.If you feel really technical you can take it apart and replace the cells,I can help with this. cooltekFeb"18/08
POWER PROBLEM
This is a common problem, makes sure the switch in front of the DVD door and off to the right is not stuck down, it tells the Screen you have opened the clamshell and must be up when opened.
Battery
http://www.shop.com/+-a-Portable+DVD+Battery-st.shtml
or you can try with model num. off batt.
http://www.interstatebatteries.com/estore/search.asp?N=2147384849&Nu=Part+Number&Ns=product+Type%7c0||Rank|1&mscssid=GQB1ECB58C2M9PLWGL4ECWAVJM169XC5&js=1
Battery problems
hi ,
do you mean that your dvd player was working god b4 getting the batery back charged or you changed it completly
solving your problem should depend on what your batery back state
if it is new should be charged first time for 12 hours
trty to power the dvd by a transformer if it get ok then you have a deffect batteries
please don't forget to rate and remember i am here just for help
thx
Dark screen
how old is your equipment? however the problem lies in the video amplifier,luminance has failed. you may replace the jungle chip(i.c.)
How do I attach my protron TV with a universal remote?
To attach your Proton TV with a universal remote, you will need to first program the remote to work with your TV. This can typically be done by following these steps:
- Locate the remote code for your TV in the manufacturer's instructions or online.
- Press and hold the "Program" or "Setup" button on your universal remote until the indicator light turns on.
- Use the remote's number pad to enter the code for your TV.
- Press the "Power" or "TV" button on the universal remote to see if it turns your TV on and off.
- If the TV does not turn on and off, repeat steps 2-4 using a different code for your TV.
12/10/2022 1:37:46 PM •
Protron...
•
65 views • 0 helpful votes
Not finding what you are looking for?