20 Most Recent
Starbucks Barista Quattro Coffee Maker - Page 8 Questions & Answers
My Barista espresso make quit
HI
You can leave the top off while you try to prime the machine. If you have a n aspirator bulb, you can use it to prime the pump. **** some water into the aspirator bulb and the insert it into the end of the tube going to the pump. Open up the steam wand with the machine off. Turn the machine on and then squeeze the aspirator bulb hard to force water into the pump. When the pump primes itself turn the machine off. Remove the bulb from the tube and then insert the tube into the water tank. Now turn the machine on again and see if the machine primed itself. If it did you should get water out of the wand, and once it flows from the wand you can turn the knob off. If you were running a descaler through the machine, you should finish rinsing the machine thoroughly.
Replace the top and you are ready to go.
Sometimes the espresso basket
Is it still warm when you are removing it? It should be cold. How does it stay in? Click in or just set in? If clicked in, try lubricating the contacts.
Barista Zia Espresso Machine
file:///Users/Julie/Downloads/Barista_Final_011305.pdf
I had the same problem. The Barista Zia is the same as the Barista Athena on the inside, the only diffrence between the two is the plastic shell on the Zia, and the steaming wand is on the opposite side. This is the instruction manuel for the barista athena, so its basically the same. Thanks! good luck!
Starbucks Barista Espresso Machine Ready Light Went Out
Call Home Espresso Repair in Seattle. I've used these guys a couple of times, and they're wonderful. Once I wasn't getting any steam, and the guy told me how to open up the case and make a simple adjustment of a set screw that probably saved me big bucks.
I was actually just there today to pick up some O-rings for the steam valve. Charged me $1. And that includes replacing them for me (I had removed the stem and brought it in).
My Rio Vapore (earlier version of yours) is now 17 years old, and I give H.E.R. a lot of the credit for that.
Oh, and did I mention that back in the days when Starbucks was small (many moons ago), they were the in-house service center for all the machines Starbucks sold?
Their number is (206) 789-9513.
Good luck.
-Kevin
Schaerer SCP is not rinsing correctly
Check the Operating Temperature:
Ensure that the machine has reached the correct operating temperature. If it hasn't, the indicator light will be on. Wait until the machine is fully heated before proceeding.
Check for Ongoing Programs:
If a rinse or cleaning program is currently in progress, the cleaning button may be flashing. Wait for any ongoing programs to complete before trying to brew coffee.
Inspect the Brewing Unit:
Make sure the brewing unit is properly seated and not obstructed. The brew group should be in the correct position.
If the brew group overflows, it could be due to a blockage or misalignment. Remove the brew group, clean it thoroughly, and reinsert it properly.
Inspect the Coffee Spout and Drainage Area:
Check the coffee spout for any clogs or blockages. Clean it if necessary.
Examine the drainage area at the bottom of the machine. If water is running away onto the floor, there may be a leak. Inspect the drip tray and other components for leaks or damage.
Refer to the Operating Manual:
Consult the operating instructions manual for your Schaerer Coffee Club machine. If the above do not resolve your issues, you may have to contact Schaerer Services.
De'Longhi PrimaDonna Soul Coffee Maker not making milk foam.
The milk delivery tube is very narrow bore and in my experience you will find the tube is blocked with congealed milk solids even if you clean then regularly. You need an enzyme milk cleaner like Rinza and even with that you need to manually massage the tubes or remove the blockages. The service engineers just replace them.
Not finding what you are looking for?