20 Most Recent iRobot 5900 Scooba Robotic Wet/Dry Vacuum - Page 4 Questions & Answers

my cliff sensor was bad i changed it and the roomba fixedvideo

Please see this link for a more in-depth troubleshooting guide.

the belt either broke or has come off the track.... this should be easily accessable from the underside of vaccuum

i just recently had someone bring in a roomba discovery and all it would do is stay in a tight 4 tile area and go in circles. battery was fully charged and all bumpers were clear.

i took a can of air blast for cleaning computers and blasted the area on the bottom underneath the sensor and watched as several dust bunnies came flying out.gave it a few more blasts for good measure and put it back on the floor and hit power then clean buttons.

thing went in same tight circle for 2 passes then the circle got bigger for 2 more passes , blue light indicator came on and it made a straight line dash across to closed door and started following the edge and criss-crossing the room.

called the owner back in to test and it repeated the same moves when she started it and all appeared to be working normal again.

That would depend on the make and model of the steamer.

Replace the part that is faulty. Here is the parts lists. https://www.google.com/search?q=Bissell+1713+Crosswave+parts+diagram ..

To turn off the LED service light on your Aerus CentraLux central vacuum model E130J after replacing the motor, switch the blue box on the circuit board from "ON" to "MEDI."

Alot depends on the type of hose. There are plastic hoses and rubber hoses. Generally you can use a smaller plastic connector to connect two rubber hoses together and visa versa, Make sure it is a snug fix. You could also use an adhesive to keep it together.

We don't have any service centres at all! We are Fixya dot com. We are a peer to peer self help group. We don't sell anything, we only provide free information. Here are a few service centres in Bacor. If you need further help, click Comment under my answer. Let me know 'make model (what it is)'. https://www.google.com/search?q=Bacoor%2C+Cavite+service+centre ..

Question edited for a lot more clarity. It indicates that it is charging. https://www.google.com/search?q=Electrolux+Ergorapido+EHVS2510AW.+The+blue+light+stays+on ..

How to open it to see if the fuse is blown. I removed the three screws I saw. I feel that there is another which prevents me from opening it in two. I looked under the tights, I removed the plate where the two buttons are located. I can't open it.

Singhal Industries produces biohazard plastic bags with high-quality materials and stringent manufacturing standards to ensure durability and containment of hazardous materials. Their bags are specifically designed to meet industry regulations and ensure safe disposal practices.

try cleaning the filters if they are blocked then suction is lost and would appear like bag was full. hope this helps

press time\alarm button three times for min hand and again for hour

Hi the lid on my miele where tools go isn't latching how do I fix it plz

check eBay , amazon or call number listed in instructions.