20 Most Recent Canon 2 Ir3300 Ir3300i B/w Copier/ Network Printer & Fax - Page 2 Questions & Answers

Create connection with fixed IP address Visit this site to get more details. http://electronicshelponline.blogspot.com/

check the developer unit,drum unit,transfer roller...

Hi . The fixing film is damaged and need to be replaced to fix that error

1. Locate and dust your paper sensor eyes
2. make sure paper size adjuster for tray 2 is locked at proper position.
3. Examine pick up roller from tray 2, clean or replace as necessary.

Hi Raj please follow link it will give you all the error codes and also will tell you what your one is..hope this helps

Open te copier and remove the paper jam. is what the manual says.

Hi, go onto google and type in e000000-00002 and you will find that you need to change the format for the printer.

Those are both fuser errors. Have you had thunder storms or other power issues? If so it may only need reset. If not the most likely cause is a failed fixing film assy. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/charles_45d8d6c78cd9f0b6

The fixing film unit faulty.Thermistor might have a short circuit.May also be the main power supply or DC controller PCB

The Bridging unit and finisher could be misaligned

Check the home position of scanner ad lens

It's wery simple actually.Just take out the paper cassetes,open the right door and you remove the roller with one move,just push the plastic pin and pull the rooler of the axe

The fuser may need to be replaced. Sometimes that code can be reset in service mode without replacing that part. Service mode--- Additional functions button, then hold down the 2 & 8 key at the same time, then Additional functions button again gets into the mode. Then select Function, Clear(CLR),Error(ERR) then hit ok and cycle main power. If it resets-great. If not,you need a fuser.

Clean the fixing unit, replace fixing film,check the pressure roller

How many copies drum made?Maybe you have to change it.Clean the optic mirrors platten glass,transfer roller...

check additional function switch and replace additional function switch

smething wrong with heater.fixing film ,silicone roller,thermistor...Check it out