20 Most Recent
Jack Lalanne Power Juicer 250 Watts - Page 9 Questions & Answers
How do you take the filter and blade off to clean?
It should unscrew in the opposite direction that the blade turns. Check the blade direction by momentarily spinning the motor with it's own power (don't touch it!). Once you know which direction it goes, unplug it and turn the blade in the opposite direction to remove.
How to clean juicer and i need the manual
Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.
Cant get blade out
Wear leather gloves
or double rubber gloves. Hold on right on top of the sharp blades and
turn it. You can also bend a 1/8 th inch diameter thick wire,
galvanized or anything metal and insert both ends on the holes on the
blades and turn it. Make sure you don't slip your hands on the sharp
blades.
Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.
Where can I purchase a
a Crescent Wrench is a type of wrench that you can adjust the size of by spinning a screw beneath the mouth of the wrench. You can buy one at any hardware store including Home Depot, Lowes etc.
Need owners manual...can't figure out how to take
Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.
How do we disassemble and get the blade out?
Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.
Jack Lalanne Power Juicer
I bought the juicer at a second-hand store in brand new condition however the crescent tool was missing. To remove the flat blade for cleaning, I use a pair of scissors spread far enough to fit the ends in both holes. Hold the basket still while turning the scissors counter-clockwise untill the flat blade detaches. Easy as that! I ordered the tool, but it hasn't arrived yet. Hope this helps!
How do you get the top of for cleaning on the jack
Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.
I cant take the strainer to clean it
Wear leather gloves or double rubber gloves. Hold on right on top of
the sharp blades and turn it. You can also bend a 1/8 th inch diameter
thick wire, galvanized or anything metal and insert both ends on the
holes on the blades and turn it. Make sure you don't slip your hands on
the sharp blades.
Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.
I have Jack Lalanne Power Juicer 250 Watts and it
The stainless bar should be on the correct slots on top of the juicer.
It has a safety switch on those bars. Smell the motor from under the
juicer, it should not smell like burnt. Press hard on the switch, it
might be loose.
I need some parts for my juicer. how can i order
Jack Lalanne Juicer Manual
http://www.myeasypics.com/is.php?i=665112&img=1.jpg
http://www.myeasypics.com/is.php?i=665113&img=2.jpg
http://www.myeasypics.com/is.php?i=665114&img=3.jpg
http://www.myeasypics.com/is.php?i=665115&img=4.jpg
I hope this helps.
The blade keeps rubbing with the upper part of the
Make sure the orange blade is properly seated and screwed in place. Don't screw it too tight though. If it still touches the top cover, sand it off or file it off. Whatever the blade touches the white portion of the cover, file it off.
Not finding what you are looking for?