Our Vizio speakers make noise the entire time the t.v. is on. What can we do to fix this problem?
VIZIO VX37L backgroud buzzing noise constatly (audio) increasing as volumne increasing. My knowlege is limited but tried looking at audo conttol setting,(nothing in which I could relate) also I found under advance picture adjustment DNS (noise reduction). it didn't seem to realate to aduio. If audio is fine and new speakers would cure all, I'd be a player.
Posted by barreto3 on
It's not the speakers. I usually hear of this problem when hooked up to an HD cable box. You can adjust the volume on the cable box and also on the TV. I'll bet you don't have this problem when watching a DVD.
If the problem is what I think it is, your HD Cable box is set at a really low volume while your TV is set to a rather high volume. Try setting the TV volume to around one-third, then set the volume on the cable box until it's as loud as you'd ever want to hear it. With the TV at such a high volume, you're actually amplifying any stray electronic signals that the wires might be picking up, and the above solution will fix that.
Posted on Apr 09, 2008
my vizio lcd 42 inch i just bout a month ago was working but then i just turned it on and there is a green screen on the hdmi input. it works on the av input but is solid green on the hdmi input.. any suggestions?
Posted by mukada on
My 37" vizio I bought in Dec 2007 did this (green screen at start-up on all inputs). At first it went away by itself after you left the unit on for 15 minutes, but then 2 days later the whole thing DIED. Luckily Costco has a 90 day return policy on TVs.
Vizio tech support suggested this (before it died that is):
Please try to reset all setting and then to see if the problem is solved. 1. Press the Menu on your Remote Control;
2. choose Set up on the OSD;
3. then choose Reset All settings;
4. Press the Exit on your Remote Control to remove the OSD.
Posted on Jan 09, 2008
My tv won't turn on. The orange light is on - will not turn green and go on. Have tried disconnecting from power, using remote, manually hitting on button.
Posted by jema on
ok I'm just going to copy paste here being as this might work for you guys, I tried it my self but had no luck but my issue has slightly different behavior(led goes green for a second before dieing). any event here is what I found:
Check this out:
DEAD WITH AN AMBER LIGHT
Do Not Order A New Board For This Vizio Model. You Can Fix This Problem For Pennys. Problem: Will Not Power Up Amber Led Only. Hint: No Reset To Operate Micro (Brain Dead) I'Ve Seen (3) Various Fixs Below, One Uses A Diode, Other Uses A 10k Resistor, Try Either. All 3 Will Work, Diode Works Best For Me This Same Reset Ic Goes Bad On Other Visio Lcd & Plasma Tv'S. #1) You Remove Smd U26 On The Video Processing Board And (Add) Put A 10k Resistor Across Pins 2&3. U26 Is Near The The Tact Switch. #2) Remove U26 And Solder A 10k Tru 100k Resistor Across Pin 2&3. Start With A 10 K First. #3) Remove Reset Ic Near Tac Switch Replace With 1n4148 Diode (Nte519). Vizio Tech Support: (Valid - I Tried It) 1-888-849-4623 Opt 4 Technical Support: 888-849-4623 Try Extension 1669 (David). Hugo Carrera Parts Department 877-668-8462 Ext 1814 Vizio Inc. 320a Kalmus Drive Costa Mesa, Ca 92626 E-Mail:[email protected]
Posted on Mar 04, 2009
No channels in Master List message on Vizio xvt3d554sv with Dish Network Satellite...what to do?
Posted by sunnykatja... on
I had this same problem. My TV had sound and the lights were on but no picture. The screen said "No Channels in Master List."Here is how I fixed it:1) I made sure that my Dish Remote was on the TV mode (when pressing down buttons, the TV button would light up).2) Once that was confirmed, I pressed 03 to ensure I was on Channel 3.3) (this was the hardest part!) I found the remote that came with the TV. I never use it so it was hard to find...4) I pressed the Input button and selected the correct Satellite option. On my TV, that option is: "HDMI-1 Satellite"5) The picture was restored!
Posted on Oct 02, 2012
We have turned off everyplace that we know of, but the CC continues to appear on the screen. How do you turn it off?
Posted by cheryl... on
If you have a digital cable box, turn off the box but leave the TV on. Hit the "Menu" button on the front of your cable box and a setup menu should come on. Use the cursor buttons on your box's front panel to go down to the "Captions" option, which is probably set to "Enabled" and hit the right or left cursor button to change it to "Disabled." That should solve your problem.
Posted on Jan 10, 2009
Hello there...hopefully you can help. I have a 6 month old Vizio VW37L TV and recently the dark brown colors displayed on screen are outlined in bright green pixels. Very annoying. This seems to come and go and is mostly noticed when watching TV, not movies through the HDMI. Vizio customer support just suggested resetting the TV settings. Already did that. Any ideas?
Posted by tshields20... on
Our Vizio started doing the same thing after only three weeks, except it was also showing green pixel when we watched DVDs. After checking this site and others and trying all the "tweaking" advised, I finally called Vizio's customer support. They were extremely polite and tried to help over the phone, but had to send someone to the house to make the repair (anything 40 inches or larger earns a house call). The tech arrived on time and was extremely professional and pleasant -- he had to replace the daughter board and LVDS cables. So far, so good.
Posted on Jun 29, 2009
Vizio TV with Blue Screen says, "Aucun Signal!" How fix
Posted by Peter... on
Guys aucun signal just means no signal in french
Posted on May 14, 2016
Six day old Vizio making buzzing sound from the back of TV, saw some other reviews but TV was older. Buzzing can be dround out by turning up volume but when you want to keep it low, you can hear it. Make have to take her back. Any Ideas!!
Posted by billcolomb on
my tv is new too and also makes a buzzing sound and i turned the DCR off and it worked to thanks for the help!!
Posted on Jan 05, 2010
After unpluging the HDMI cable & reconnecting it back, I don't have no more HD picture. The Component cable & HD antena works but no HD brodcasting with HDMI connection. Changed the HDMI cables and still have same problem. Even I used another LCD TV & pictures from my receiver and HDMI cables are fine.
Posted by hamidtroni... on
Is the HDMI port 2 work? Try to turn it off and turn it back on. If it is still not working then the HDMI ports have gone bad. You will need to replace the main board.
Posted on May 12, 2009
This TV is hooked up to an antenna with a booster. In the last week, it has frozen two times. The first time it was 1 1/2 hrs. later that I returned into the room and saw it frozen on the news station at 8:29 AM
Posted by mcmahon15 on
HELLO to the guy saying hello ... I am on cable and have the same freezing problem ... so take the attitude and shove it!!!!!
Posted on Dec 19, 2009
659 questions posted
Usually answered in minutes!