20 Most Recent
Ionic Pro CA500 Air Purifier - Page 2 Questions & Answers
My Ionic Breeze air purifier makes an intermittent
you need to turn it off and remove plates,put in kitchen sink and spray with windex and dry with paper towels, now clean the bottom of the three plates too.
before
you reinstall the plates look down inside you will see three thin lines
of metal,make sure there is no lint or dust on them,reinstall and let
set for five min. to allow any windex that might still be wet then turn
on low for a couple of min.then go to medium
MOdel CA-500 is making a type of hissing sound.
you need to turn it off and remove plates,put in kitchen sink and spray with windex and dry with paper towels, now clean the bottom of the three plates too.
before
you reinstall the plates look down inside you will see three thin lines
of metal,make sure there is no lint or dust on them,reinstall and let
set for five min. to allow any windex that might still be wet then turn
on low for a couple of min.then go to medium
Need to clean blades
they should lift out of housing like a cartridge. wipe down with soap water, dry and reinstall. May have a retainer scre/knob on top or twist off cap good luck
Red...cleaninh light..
ame problem. I returned it to the store and they gave me a new one. So Far so good. My little ionic pro now keeps shutting off by itself. Have no idea why.
Ionic Pro CA-500B Power On Instant Clean Light
If the plates are clean, there is nothing wrong with them. They are just 3 strips of metal... they don't even connect to each other unless they are in the unit. NO NEED TO REPLACE THEM.
Ionic pro problem
Try cleaning the springs the the blades connect to, they're probably making a bad connection due to dirty springs.
Not finding what you are looking for?