20 Most Recent
- Page 7 Questions & Answers
My coffee pot is very slow and only 3/4 of pot fills
With the machine full of water and still turned on, pour in 1 qt of white vinegar into the top and place decanter on base and close the lid. You will let this sit in the machine for 2 hours. At the end of 2 hours, flush out the vinegar with 8-10 decanters of water.
The metal proble is use to clean out the water tubing. Remove your sprayhead and insert the metal rod up in the hole leaving out about 1-2 inches. Then simply twist and turn the rod about 5-6 times. This will remove any lime deposits. Then flush out with 2-3 decanters of water. You can obtain a new manual by calling customer service or going to the website-www.bunn.com going to @home, then products-click on your brewer-and then select use and care manual and you can print it out or view it online.
Am I supposed to keep the button on the lower left
Yes that is the vacation switch and should be left on to allow the tank heater to keep the water at the right temperature for brewing coffee. It only needs to be turned off when you will be gone away for 4 or more days. If you do turn it off, it takes 15 min to heat the water back up to the correct temperature.
Bunn coffee maker leaking from underneath the bottom
Please get the model and the date code from the bottom of the machine and contact customer serivce. Depending on the date code, there might be a seal kit available or the machine can be replaced at no cost if 3 years old or less. If it is over 3 years old and the seal kit isn't available, the machine will be replaced at a reduced price.
GR-10 Bunn coffeemaker: Heating element is split
I do apologize but the part you are looking for is not available. Please look at the bottom of the brewer for the model and date code. Then contact customer service so that you can be assisted further. The machine carries a 3 year warranty so if it is 3 years old or less it will be replaced at no cost. If it is older than 3 years, it will be replaced at a reduced price.
I need a wiring diagram for a Bunn BX coffee maker
I do apologize but these diagrams are not available. What is the problem with the machine? If you will get the model and code date from the bottom of the brewer and contact customer service, we can help resolve your issue. The machine carries a 3 year warranty and if it is 3 years old or less, it will be replaced at no cost. If it is older than 3 years old, then it will be replaced at a reduced price.
After the Bunn is done brewing it drips clear
When it continues to drip, this generally means you have a lime deposit build up in the water tubing. To correct this, if you remove the sprayhead and insert the deliming tool all the way up the hole and twist and turn it 5-6 times, then flush with 2-3 decanters of water, this should fix the problem. If it doesn't, get the model and date code from the bottom of the machine and contact customer service.
Bunn 10 cup home coffee maker
It sounds like a seal/gasket is defective causing it to leak. Please locate the model and date code on the bottom of the brewer and contact customer service for troubleshooting and replacement options.
Started making a Skeechy sound after making coffee.
It is possible there is a problem with the tank heater. Please get the model and date code located on the bottom of the machine. Then contact customer service with this information. The brewer contains a 3 year warranty and if your brewer is 3 years or less will be replaced at no cost. If it is over 3 years, then it will be replaced at a reduced cost.
I mislaid my instruction booklet, how do I clean
With your brewer still turned on and full of water, pour 1 quart of white vinegar into the top and place the decanter on the base and close the lid. Allow the vinegar to stay in there for 2 hours. Then you will need to flush out the machine with 8-10 decanters of water. There is a manual located on the website www.bunn.com
. Select @ home then go to products. Select the model and then there is an option to download the manual. Or you can call customer service with the model and code date and a manual can be sent out to you.
My bunn leaks at the bottom
A seal/gasket can go bad. If you will get the model and code date and contact customer service, we will be happy to assist you in resolving this problem.
I have a GRXB bunn 900 watt 10 cup coffee maker
If sounds like a bad seal/gasket. Please call customer service with the model and date code. If your machine is 3 years old or less, it will be replaced at no cost. If it is over 3 years, depending on the date code, there is a seal kit available to repair the leak. Or we can replace it at a reduced price.
How do i remove the bottom of the bunn to check
There isn't a way to remove it and is not recommended. If you will get the model and code date from the bottom and contact customer service, we will be happy to resolve your issue with you.
The heater in my Bunn Coffee Maker continues to
If you will get the model and date code located on the bottom of the brewer and call Customer Service we will be happy to help you. If your machine is still under warranty-3 years or less-we can replace it free of charge. If it is over 3 years old, we can offer you an exchange for a new machine at a reduced price.
Not finding what you are looking for?