20 Most Recent
Questions & Answers
Heats up water slowly, only by repeated operation
The wash tank element should be operated through a 3 or pole contactor which gets its power only when the rinse tank has come up to temp and switched the thermostat over(rinse tank heating takes priority). Is the rinse tank element fully intact ie-is it pulling its full amperage or is part of the element blown causing it to take longer to heat? Is the rinse contactor dropping in when the thermostat for the rinse tank is turned fully down?
It sounds like a thermostat or contactor problem- good luck and let me know how you get on.
Champion 26 in....
on Apr 01, 2007
Champion uh1ooB. Water continues to
for using FixYa. To start with check the water inlet valve which is located
behind the lower access panel on the left or right side of the Dishwasher. If
the water inlet valve is bad you have to replace it, also check the main water
line for clogs/obstructions. If still the issue is not resolved then it’s a bad
float switch and needs to be replaced. Please do accept the solution if the
issue is resolved or post a comment for further assistance.
on Jul 13, 2010
Anti flood device activated built in ikea dishwasher
If you open the door and lie on the floor under it you can screw off the panel under the door (5 screws on ikea's enest?ende machine) if it is the same system. The pan underneath is easily accessed then. I couldn't get our pan out so the water can either be sucked up with a hoover or battery window cleaner or cloth. Once the water is gone the anti-flood system stops. Tried it yesterday. Then you just have to find out why it leaked in the first place!!!!
on Oct 22, 2020
Not finding what you are looking for?