im not an expert , but it could be the bruhes or bearings on the motor , other wise , lose conections , check manuel , go to hoover on internet for ansers
If the cable is broken, you should just be able to replace it. The cable comes with a "mushroom type" button at the top that will slide into the "actuator" Take off the 2 screws on the back compartment just above where the power chord goes into the machine. The top of the handle will slide off toward the back of the machine and you can see where the cable connects and how the power switch is activated.
? 6:01
https://www.youtube.com/watch?v=QBtWcC4gqjY
Apr 21, 2009 - Uploaded by general0ne
I think Ill make one for the Dual V steam cleaner and provide some tips on maintenance. Good job ... The ...Missing: lock
? 6:16
https://www.youtube.com/watch?v=sul52ULCR90
Jan 12, 2010 - Uploaded by general0ne
Dismantling the Hoover Steam Vac Deluxe. general0ne .... Aftercleaning the screen as shown on the video ...Missing: f5915905 lock
There is no answer for that. You must have vary thick padding on plush carpet. Usually the highest setting is high enough. Is it hard to push and pull?