20 Most Recent
- Page 2 Questions & Answers
New Keurig B140 will not pump or prime
On the water reservoir there is a little black disk, a magnet, I think... If that is not against the machine it will display the prime error. Empty the water from the reservoir and tilt it so that the disk is against the machine. Place the reservoir empty back on the machine and fill it with water carefully as not to move the disk. When the water level gets to the correct position, the prime error will go away.
Plugged the Keurig K15 mini to 220V, can it be repaired? how?
Hopefully you have only blown a surge suppressor and a fuse on the circuit board. You will have to open the coffee maker and inspect the circuit board for any obvious damage to the components. The best solution is to ask for the repair of an expert - a technician.
Why doesn't it turn on?
Your coffee maker might not turn on because the exterior buttons are not properly engaging the switch. To be able to have access to the switch, first unplug the unit and also remove the carafe and turn it upside down.To access the switch, first unplug the unit, remove the carafe and flip it upside down.
Keurig chugging noise when I turn it on...............
I believe it is not problem. Some models make that noise when they are heating the water.Ours does the same chugging noise but works well. We have a different model also and the second one does not make the noise but then it is a later model without the bells and whistles of the first unit mentioned.
Keurig serial number is 48 4300 067 4953 what model do i have
To properly identify a model for which you don't have the carton or manual, remove the water reservoir and its lid, and set these aside. Remove any pod if present from the pack holder. Carefully turn the unit over and look for lightly engraved text on the underside of the base. It will read, in capital letters, something like "KEURIG SINGLE CUP BREWING SYSTEM, COFFEE MAKER MODEL K45."
Not finding what you are looking for?