20 Most Recent Universal Remote Control Hampton Bay Universal Ceiling Fan/TV/DVD/Satellite Remote Control - Page 6 Questions & Answers

I had this same problem with a Hampton Bay fan with a remote light switch. I call the manufacturer of the of the switch and was told that the model switch I had would not work correctly with CFL bulbs. The problem is with the dimmer function. You either need to change the bulbs to incandescent, or change the remote receiver in the ceiling. Hampton Bay was kind enough to send me a new receiver that works with CFL. The CFL units are white, and the incandescent is black. Hope this helps you.

Here is the direct tv remote guide. Please refer to it

http://www.directv.com/DTVAPP/content/equipment/remoteguide

http://www.retrevo.com/support/RCA-RCR311W-Universal-Remotes-manual/id/402ci571/t/2/

Here is the manual for RCA universal remote

https://fjallfoss.fcc.gov/prod/oet/f...ive_or_pdf=pdf

Please visit the URL link above to download the manual for for your Universal Remote Control Hampton Bay.
Regards

You can check on ebay to get a new one or from the manufacturer.

Hello
Get into this link and you can download the manual of Philips universal remote control sru 3030. If you feel any difficulty in downloading the same, send your email address to me by FixYa comment box. I'll send a copy of the manual to you by return mail. OK.
www.p4c.philips.com/cgi-bin/.../cpindex.pl?...SRU3030/

You have to change the dip switch settings on the receiving unit at the fan, then re-learn the code on the remote.

Find magic button or setup button. Turn on device. Hold down button you would like to program it may blink twice. Punch in 911. Toggle between power and device until device turns off. Hit magic or setup button. Hope this helps

I have the same problem. I kept turning the wall switch on and off quickly and slowly until i could hear the relay in the fan housing click. When this was done the fan switched into reverse but i still cannot control it properly from the remote. I have had this fan for about 3 yrs. Also you can check the "Dip" switch settings in the remote ( remove the battery cover they are located behind the batteries, you can move them with a pen) and inside the fan housing, Make sure they are set exactly the same. I think vibration may make them move in the fan part. Make sure they are fully set in the same position.