20 Most Recent Hotpoint 23 in. BF50 Built-in Dishwasher Questions & Answers

0helpful

1answer

Circuit breaker trips when dishwasher is off.

the problem will be in the circuit to the door opening the door and it trips the breaker indicates that the hinge is rubbing on a wire or making the harness move to ground out

Read full answer

11/16/2017 9:38:56 PM • Hotpoint 23 in.... • Answered on Nov 16, 2017

0answers

Dish Washer causing RCD tripping

Read full answer

Be the first to answer 3/29/2017 12:24:03 PM • Hotpoint 23 in.... • Posted on Mar 29, 2017 • Be the first to answer

0answers

Handle replace remove

Read full answer

Be the first to answer 9/23/2015 6:39:10 AM • Hotpoint 23 in.... • Posted on Sep 23, 2015 • Be the first to answer

0answers

Need a replacement fascia

Read full answer

Be the first to answer 12/6/2013 8:47:46 PM • Hotpoint 23 in.... • Posted on Dec 06, 2013 • Be the first to answer

0helpful

1answer

Dishwasher takes ages to do the job

there is a screen in the fill valve it could be getting plugged, or you have a kink in the fill pipe , [email protected]

Read full answer

8/22/2011 7:16:19 PM • Hotpoint 23 in.... • Answered on Aug 22, 2011

0answers

My hotpoint bf50 dishwasher never

Read full answer

Be the first to answer 4/25/2011 5:38:43 PM • Hotpoint 23 in.... • Posted on Apr 25, 2011 • Be the first to answer

0answers

The small plastic lever which

Read full answer

Be the first to answer 4/13/2011 2:19:54 PM • Hotpoint 23 in.... • Posted on Apr 13, 2011 • Be the first to answer

0answers

How do I replace the handle on my BF50B

Read full answer

Be the first to answer 2/27/2011 2:54:39 PM • Hotpoint 23 in.... • Posted on Feb 27, 2011 • Be the first to answer

0helpful

1answer

Leaking water from the corners of the front door

Hi,

Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101

Read full answer

11/30/2010 12:57:43 PM • Hotpoint 23 in.... • Answered on Nov 30, 2010

0answers

What does the message A07 mean?

Read full answer

Be the first to answer 10/31/2010 11:57:02 AM • Hotpoint 23 in.... • Posted on Oct 31, 2010 • Be the first to answer

0helpful

1answer

Hotpoint bf1620 dishwasher flashing light fault

Hi ,When this happens I keep the button with the letter "P" Pressed until the fault lifgt resets,my row of buttons is inside the top edge of the unit.

Read full answer

6/10/2009 10:04:53 PM • Hotpoint 23 in.... • Answered on Jun 10, 2009

0helpful

1answer

Lower spray arm

New Spray arm split around center joint so when it gets hot it opens up spraying water under door

take it back for another

Alan

Read full answer

10/22/2007 7:17:46 PM • Hotpoint 23 in.... • Answered on Oct 22, 2007

0helpful

1answer

Dishwasher tripping the circuit breaker

Andy, leave the breaker off and remove the toe panel (bottom panel) from the dishwasher. Remove the cover of the junction box where the cord connection or wiring is made. Look at the wire caps and see if they are not burnt. Sometimes these connections become loose and arch, tripping the breaker. If so, cut the wires, strip a new end and reconnect. Catriver...post back.

Read full answer

8/21/2006 7:05:52 PM • Hotpoint 23 in.... • Answered on Aug 21, 2006

0answers