Top 20
Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher Questions & Answers
Hotpoint DC28 not washing
1.press cancel button
2.check if the door closes securely.
3.since there is water in d/w try running a short cycle.If it works, clean the inside thoroughly to ensure no clogs.
Diplomat dishwashe
when turn on the light automatically switches to intense and there is a constant sound of himself
kelvinator kd12ww1 dishwasher
My diplomat dishwasher does not clean the dishes
is it a film on dishes? if so
The problem is hard water. www.dishwasherfilter.com has a
product to solve this problem once and for all. It filters the water going into
your dishwasher and removes the hard minerals that leave those spots. It is
very affordable and even has a money back guarantee. You will love the way your
dishes look with this product.
My adp8352 has 3 flashing
Try unplugging it and plugging it in again - that might reset the unit. And find an online operator's manual and see if there is information that will guide you - they are usually a free download from manufacturer's website.
After selecting a program, the
Basically the dishwasher is telling you there is a fault - Not so useful I know! Plug out the machine and leave it for five minutes and see will it reset. If that does not work, you will need to reset it manually. To do this consult the manual. If you don't have a manual, go to http://www.hotpointservice.co.uk/hs/pages/manual/manualSearch.do and down load one. Good luck!
Dirty Dishes
Hi,
I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works like new... However I have also foundthat if the heating element goes bad then that also can mess things up bad...So I would buy new spray arms, and also check out the heating element to makesure it is working... Here is a tip that will help you with the onlinebuying...
Dishwasher
SprayArms not Spinning
How to Buy
ApplianceParts OnlineA bad heating element causes many problems in dishwashers...
Dishwasher Problems The
HeatingElement not WorkingDishwasherMaintenance
DishwasherResidue and Film on Dishes
heatman101
Asker's Testimonial "explanation very clear. will give it a go and see howsimple it was. thanks Ronnie " - ronnieshomes
;
';
';';
We have a nearlynew DC28 Aquiliser system
As stated in my e-mail I asked please could you provide a copy of the operating manual, by e- mail or post to my home :-
2 Windmill close, Appleton, Warrington, WA4 5JS
REPLACEMENT BUSHES
i managed to find a lip underneath the carbon bush
lifted it up slightly and slid out the plastic casing to the side
then replaced the new ones
Hotpoint 800 de luxe 9526
at rear of machine, remove the small panel at bottom. you will see a large diameter hose going from bottom of machine to the pump. remove this hose at the machine end and the filter is inside. take out and clean. careful - water will come out is machine has not drained
best to disconnect from mains of course
Diplomat dishwasher
dishwasher starts then goes to prewaash and beeps.When opened it flashes f2.
Hotpoint DC28 Dishwasher Problem
u will more than likely find its the element... and i would not charge that for to come out.. ive one here im doing.. u can get the part for 40 quid on the net.. im charging to fix this one 90 in total.
let me know what happenes
Dishwasher emptying
check the base of the machine and see if it has water in it. if so, this will cause the dishwawsher to pump out all the time. mop out and it shoiuld run. you have a leak and will have to trace it - not always easy
Have a hotpoint aquarius dishwasher
Won't work powers up
Red light comes on with salt
2 nd red light come on showing X
What is the X?
Please
Here's what you can do to address this issue:
- Check the Salt Level: Ensure that the salt reservoir is filled with dishwasher salt. The dishwasher needs salt to soften the water and improve the cleaning performance. If the salt level is low or empty, refill the reservoir with dishwasher salt.
- Check the Salt Dispenser Cap: Make sure that the salt dispenser cap is securely closed. If it's not closed properly, it can cause the "X" symbol to appear on the display.
- Reset the Dishwasher: Try resetting the dishwasher by turning it off at the mains power supply for a few minutes, then turning it back on. This can sometimes clear error codes and restore normal operation.
- Check for Blockages: Ensure that the salt dispenser and its inlet are free from any blockages or obstructions that could prevent salt from dissolving properly.
- Consult the Manual: If the issue persists, refer to the dishwasher's user manual for troubleshooting steps specific to your model. The manual may provide additional information about error codes and how to resolve them.
If none of these steps resolve the issue and the "X" symbol continues to appear on the display, it may indicate a more significant problem with the dishwasher that requires professional diagnosis and repair. In such cases, contacting Hotpoint customer service or a qualified appliance technician for assistance is recommended.
2/20/2024 10:06:32 PM •
Hotpoint...
•
22 views • 0 helpful votes
Not finding what you are looking for?