Tivo DirectTV Remote Remote Control - Answered Questions & Fixed issues
My direct tv remote control
Hi Mr: sherrer,
Did you try to change the battery, and see if it would work again as it was before?
Do this please, and let me know if the problem is solved.
Best Regards.
Remote to my tivo won't work my on/off and volume on Akai TV
I recently bought a used LCT2060 that had no remote. I figured my
comcast cable remote would work without a problem but it didn't. So 3
universal remotes later I found my solution...a
radio shack
universal gamer remote. It controls up to 5 components plus your
xbox360, playstation and pc. The price on sale was a mere 12.97, not bad
if you ask me. Hope this helped. The code that worked for the
Akai
was 11676. Take care...
Tivo DirecTV Remote-Program AKAI LCT2721AD
Try this: On the Tivo remote press and hold the TV Power button and the Directv/TIVO button at the same time. Hold both buttons down for about 4 seconds or until remote light stays red. Then press the channel up button until the tv turns off. You may press the button over 100 times. You need to go slow. When the TV turns off press the enter button (or select button).
4/24/2009 12:32:14 AM •
Tivo DirectTV...
•
Answered
on Apr 24, 2009
•
4,561 views
Where is the tivo button located?
Generally, the Tivo button is at the very top of the Remote, in the middle. It's the larger button that *isn't* round, but more of a square shape.
Cannot program Emerson Jumbo Univ remote to DirectTV
Try this: Press and hold the TV Power button and the Dirctv/TIVO button at the same time. Hold both buttons down for about 4 seconds or until remote light stays red. Then press the channel up button until the tv turns off. You may press the button over 100 times. You need to go slow. When the TV turns off press the enter button (or select button).
TIVO Remote Control Problem
A similar problem happend to me. Buying a new remote fixed it - for about three weeks.
Maybe your new one will work longer.
Help quick
Goto tivo.com to get your remote and the manual is available on the website as well for your Tivo.
REMOTE WON'T WORK WITH TV
The problem is the DVR is only programmed using a set amount of codes. They don't update them. If your DVR is a few years older than your TV set, you're out of luck. .
You could contact DirectTV customer service and see if they have a solution in technical support for that tv. It's possible another set of manufacture codes will work with it and tech support has it noted.
Not finding what you are looking for?