20 Most Recent Blaupunkt ME-3 - Page 3 Questions & Answers

connect the lan cable and open main menu on settings allow what you want to run and some apps from playstore

disable this function on display setting commercial or home use

in the main menu disable this function commercial or home use on display settings

remove all input cables now switch on your tv after on press menu and go setting display next restore it if it was succesfull youre done

probably the problems started as the tuner board malfunction, replacing it should fix the problems. Or, if you have the firmware of your TV, upgrade the firmware first

The entire movie has not been recorded of the flash drive. There was not enough GB storage for the movie. Either use a flash drive with more capacity or record the movie on a DVD

If you wish to get some details; visit the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size. Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. {View the site in web view or by a desktop to see the search box. Mobile view has no search box.}/

Blaupunkt Serviceportal Visit this site to get more details.

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main digital board. /

Power board or more likely LED lamp failure, try the flashlight test

if 0000 doesn't work you can't

Ive never heard of that make!!

I do not know this TV but my reaction would be to unplug any external monitors so its working just its own, then turn it off (by the mains) wait five minutes then turn on and see if anything has changed. If not then see if you can get the menu up, if you can find its system reset/ restore to bring it back to when it was new, this will mean you will have to reset things but it might clear any other issues. Should that fail then I suspect its graphic IC has failed which will be a new TV because modern sets are not worth repairing beyond about 3 years less so for the real cheap types, due to technology moving on which results in older models losing value very quickly. Hope this helps..........

The forum///or utube

There is usually a process for resetting the TV to factory just like cell phones (you will have to google it for your specific TV), once this reset is done and no progress I suggest that there is electronic issues and capacitor/s typically need to be replaced, or its a backlight issue and that may be more difficult to fix but can be seen on youtube videos for examples of what needs to be done.