20 Most Recent Brother SE-270D Computerized Sewing Machine - Page 6 Questions & Answers

Is it a pre-loaded card - or one you add patterns to?If its one you add patterns to, make sure the pattern isn't too large for the machine. EG if machine does 4"x4" and you've loaded a 5"x7" pattern, try down-sizing the pattern/ breaking it up into smaller sections to load & sew

there's something wrong with the machine since the cassett will not lockdown, then machine needs to be checked

try changing the needle-flat side goes to the back of the machinetry rethreading the machine top & bobbin make sure to get every thread guidemake sure the bobbin is inserted in the bobbin case correctly

the machine needs to be serviced so you can find out about the unusual sounds

sounds like the machine is out of time & needs to be taken to a sewing machine repair shop for repair

rethread the machine & see if the thread is caught anywhereif that doen't help turn the machine off for a few seconds & the turn it back on to see if that will clear it.

I might have the same problem and I think is due to the fact that the needle is too close to the foot so the adjusting of the tension does no influence.

copy this link into your browser address field:http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/HomeSewingMachine/hf_se270deus.html?reg=us&c=us&lang=en&prod=hf_se270deusthis is the Brother support website and many manuals are available there.Click on the Blue word "manuals" then choose your language to open the PDF file.Once file has opened you can save to your PC - use the icon that looks like a clipboard to do this. Then you can print and view the file anytime.

copy this link into your browser address field:http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/HomeSewingMachine/hf_se270deus.html?reg=us&c=us&lang=en&prod=hf_se270deusonce the screen opens you'll see a blue "Manuals", click this, then choose "English" to open the pdf file to screen.Save to your PC so you can access it anytime and print it if you like.

Google "BriTon Leap" for solutions for using your iMac. They have programs called Embrilliance, which works with iMac

is this a fitting problem with the pattern? or do you mean that the seam is pulling up?If the sleeve pattern is too small, then you may need to alter it.There are lots of books on altering to fit you, Palmer Pletch write several and you should be able to find these in the library. But put simply, you need to add some more fabric in to the back of the sleeve if its too tight in the top of the shoulder and the easiest way is usually to "slash and spread " the pattern piece, then paste this new shape down over a sheet of paper and remark the outside cutting edge. Remember, if you add in an inch in the back of the sleeve piece, you will need to add an equal or similar amount into the back of the shoulder where the sleeve fits in to match.

If the thread is looping on the bottom, then your problem is on the top. Pull the thread out of the needle and and put the presser foot down. If the thread pulls thru easily, then you need to rethread your machine making sure the thread is thru the top tension wheel correctly.

Rule of thumb::
Loops on the bottom, Problem on the top
Loops on the top, problem on the bottom.

l have a pe-200 brother machine and the needle won't go down and is making a noise can anyone help .l have checked belt and that's fine thanks

no, check with these sites for one

sewingpartsonline.com

sewvacdoctor.com