20 Most Recent
Brother SE-270D Computerized Sewing Machine - Page 3 Questions & Answers
How do I adjust the timing on Brother inovis 1500 sewing machine?
Clean the machine, especially the bobbin and bobbin case area and around the feed dogs. Take all the thread off the top of the machine, including thread off the spool pin. Raise the presser foot. Rethread the top with the presser foot UP, which lets the thread get between the two tension disks. Put the foot down to sew, and hold the ends of the bobbin and top threads together behind the presser foot for the first 2-3 stitches in each seam.
See also:
http://www.picturetrail.com/sfx/album/view/22521551 I'm betting you're seeing something like the last two pairs of photos.
Large amount of thread on rear of material, like nest
Perhaps the needle thread tension is too loose for the material your
sewing. It could be that your thread dog is clogged with thread (this
has happened to me) Check your bobbin, perhaps its just wound poorly.
OR the needle you are using is too fine/heavy for the thread.
The bobbin won't spin in hook
Bobbin won't spin in hook? .. you may have something blocking the thread 'path'...or sensors? Try threading manually, right through with some unwaxed floss... while the machine is turned off.. or better still.. as you do each thread 'tension' area... check with a flashlight to see there isn't anything lodged (old threads caught anywhere...) when was the last time you had your machine cleaned?
Bobbin doesn't spin in hook
You might have a piece of the needle lodged in the shuttle where the bobbin goes in or some thread under the shuttle. If so clear out very gently to unjam the shuttle so it will be free again to spin the bobbin. Use the hand wheel not the presser foot.
Not finding what you are looking for?