20 Most Recent
Brother BRTPT65 PT-65 Label Maker Printer - Page 2 Questions & Answers
Can't change the font style & size on my Brother PT-65 Label make
In case you've forgotten how to change the text size, hold down 'Code' and '& Size' key to display the current setting. While still holding the Code button, push and release the '&' key to change the size.
To reset, I would try removing the batteries for a few minutes before reinstalling them.
Just two guesses.
Unit won't turn on -is it dead?
I had a problem in that I purchased cheap batteries. Brand new out of the box at least three were bad. Confirm your batteries are OK by using them in other electronic items. Even one battery too weak or bad will cause a problem.
>I'm also assuming that you have correctly replaced all the batteries back in the PT65. My mother always puts one battery in wrong and needs help. LOL...
How do i load tape in pt 65?
Remove back cover by pressing down on dots. Make sure you have the correct size replacement (they start with an M and are 9mm or 12mm).
Put the side of the tape that has the open V in it over the silver metal holder in the PT65. Snap the left side of the cartridge in. This should line up the black roller with the exposed part of the tape.
Snap the lid back on and turn on the unit. Hold the CODE button and press the space bar so some of the tape feeds out of the top.
How can i get a
Hi halliemain,
Here's the download website for the user guide for Brother BRTPT65 P-Touch.
Click on the link for the download: BRTPT65 P-touch
Hope this helps!
Good Luck!
Thank you for using Fixya!
Changing font size
I just wasted 20 minutes to get the font size changed. Press Code and then the & you keep pushing the & and it will toggle through the numbers 1-5 (5 being largest)
Not finding what you are looking for?