20 Most Recent
Brother MFC 210C All-In-One InkJet Printer - Page 3 Questions & Answers
SLOW PRINTING
some brother are set for slow print for photos etc check yours to see if the setting is correct
Printer is saying unable to clean model mfc215c
If you look at the Brother website, you will find a trouble shooting guide for your machine.
In the guide, for the error you quote Brothers guidance is to check for a stuck piece paper, however it also states that if the print head is hard over to one side (righthand side if memory serves me correct), then to contact Brother. If you do so, Brother will tell you it needs to be serviced by a Brother agent, which will likely cost you more than a new one !
If it isnt a stuck peice of paper, the problem is due to the fact that Brother machines excessively self-clean. Each time they self-clean a small amount of ink is dumped in to a holding tank/sponge. When a predefined number of self-clean operations have been performed, the machine refuses to print and gives the error message you have stated. Brother state that the tank/sponge must be replaced before the counter is reset.
However, there is a way of reseting the self-clean counter yourself - if you Google your model number and the error code soemwhere in the results you'll find how to do it. The only risk of doing this without changing the tank/sponge is that it will eventually overflow and leak out the bottom, but I did my Brother all in one some time ago and have had no problems yet.
Waste tank
good day! please go to the nearest service center or technician, you printer need a general cleaning, need to replace their sponge in the waste tank, to avoid overflow, it may cause damage of the internal parts of your printer, like the sensor.
Borhers does not print
printer says cyan cartridge needs replacement, however when I replaced it, it says that there is no cartridge.
Betty
Error 49
ph defective. This cant be fixed, sorry. You need a new mfc.
Not finding what you are looking for?