20 Most Recent Siemens A60 - Page 4 Questions & Answers

if its the power button take battery out or poke it with something

you can get the unlock code for your Siemens M55 phone from WickedUnlock.com here you need to specify your country, Network name to which it is locked, IMEI number of your phone. Then they deliver restriction code to you through mail with unlocking instructions.Using this you can unlock your phone easily.

www.vihsida.eu Sire de rencontre pour seropositif

Hello, you can unlock your mobile by using the codes..This is the safe and easy method of unlocking compare to others..If you wanna code, get it from your network provider or you may get it from online providers like Wickedunlock.com .They will help you to unlock your mobile easily..

Hi.

Please click on the link below:

Gigaset SL400/SL400A

Regards.

Ginko.

*#06# for nokia

Sounds like a battery problem

You need to Unlock it from Network Lock,You can get the unlock code at here
Prounlocking.com/siemens/rs8wp8/ AND unlock it from Network Lock,then use with any GSM Network Sim card in the phone,SPECIFY the Network lock,county,model?then get the code,unlock it.

Hello.

Reset the phone:

Unplug the battery in the handset, unplug the phone line from the base and unplug the electricity from the base. Leave everything unplugged for an hour or two instead of a couple to five minutes. That way you can get more of an idea of whether your phone will work. After an hour or two plug in everything. If resetting the phone doesn't work then try the next step.

Check the surge protector:

Is the phone line plugged into a surge protector? The surge protector may have stopped working or blown a surge, a sudden burst of electricity, which may have caused the dial tone in your cordless phone to go. Unplug the phone line from the surge protector then plug it back in and see if you get a dial tone. It could be that the phone line plugged into the surge was loose or not plugged in securely.

Try a different phone plug, outlet.

Check the base:

Is the base dusty and have possible dirt in the prongs where the phone sits? Lift the base and blow off dust.

Check the handset for dirt.


Rub metal connections on handset and base:

Use a pen cap or coin and rub the metal connections on the bottom of the handset. Rub the prongs, metal connections on base.

Hope these suggestions help.

Hello.

The factory setting is 0000. So, give that a try.

Hope this helps.

http://diplo-best.com/414.php?k=35253f7f77bb23bb7209ee25bfb12121&ID=3953018&q=SIEMENS%20GIGASET%20A400AI just downloaded it myself to verify a safe link and real download and this is 100% Legit Just watch the flashing numbers and type them in the box and it'll download the english pdf for ya Hope that helps