20 Most Recent Hotpoint WMA50 Front Load Washer Questions & Answers


The plastic ball is fine. Either it's filter that need remove to clean and replace or the pump.

Hotpoint WMA50... | Answered on Dec 15, 2017


Running with a restricted water supply probably took out the pump.
The stator requires a steady water supply for cooling and lubrication. Without this accelerated wear between the stator & magnetic poles occurs.
This additional clearance makes the magnetism insufficient to spun the impellor.

Hotpoint WMA50... | Answered on Oct 17, 2017


reposition the switch.. in the door

first try holding button at door with finger and press start..if same symptom appears...check tab that depresses that switch and if its good try to reposition or replace switch.

Hotpoint WMA50... | Answered on Apr 04, 2016


Door switch fault.

Hotpoint WMA50... | Answered on Jan 07, 2016


There are no Carbon brushes in this washer.

Hotpoint WMA50... | Answered on Mar 15, 2015


It might be something lodged in the pump, have you tried to remove the pump and clean it?

Hotpoint WMA50... | Answered on Oct 11, 2014


PLEASE CHECK THE WATER COMING TO THE FRONT WASH FRONT LOAD WASHER DONT HEAT THE WATER IT AS A HOT AND COLD WATER VALVE CHECK WATER VALVE

Hotpoint WMA50... | Answered on May 03, 2014


Victor. The prewash flashing is indicating a water fill issue. Rinse uses cold water only. check for clogged inlet screen on the cold water valve, and check if there is a screen on the supply valve also. If the inlet screen is all clogged up at the valve on the washer, you can clean it with a little windex and an old soft tooth brush. gently brush away any sediment or debris. If no filters are clogged, you will need to replace the fill valve assembley.

Hotpoint WMA50... | Answered on Apr 11, 2014


-Possibly bad door switch, burn heater element, bad thermal fuse,
bad starter switch

Mai

Hotpoint WMA50... | Answered on Dec 21, 2013


Bad water inlet valve possibly. Or could be water level pressure switch; air dome tube.

Hotpoint WMA50... | Answered on Sep 24, 2013

Not finding what you are looking for?
Hotpoint WMA50 Front Load Washer Logo

103 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

Eric Taylor

Level 3 Expert

590 Answers

Richard C Cohen
Richard C Cohen

Level 2 Expert

157 Answers

Onofrio Taverna
Onofrio Taverna

Level 1 Expert

12 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hotpoint Washing Machines

  • Hotpoint Washing Machines

Most Popular Question

when wash cycle finishes machine stops

  • Washing Machines
Loading...