20 Most Recent
E-Machines eMachines Monitor E15T4 - Page 2 Questions & Answers
"frequency out of range"
WHEN STARTING WINDOWS PRESS F8 KEY AND START PC IN SAFE MODE.. THEN CHANGE DISPLAY MODE TO 800BY 600 RESOLUTION
Emachines monitor (E15T4W) color downloads
Check the monitor settings in the control panel. You could have the red turned way down or everything else turned way up. If it isn't that, your monitor probably lost the red driver.
MY SCREEN IS NOT BRIGHT ENOUGH ON EMACHI
tried to make an adjustment in the settings let see if you can get good screen display. if you adjust in maximum brightness settings then its like no change, it could be a back light issue.
11/11/2012 12:25:58 PM •
E-Machines...
•
Answered
on Nov 11, 2012
Dot in the center of my lcd modnitor
You may have a bad pixel, unplug and disconnect video cable, now press and hold power for 2 minutes. Now plug everything back in place and start monitor, is dot is gone ? if yes! there was a static charge that caused the dot to appear, but if there was no change! you have a dead pixel no remedy.
Using two monitors attached to my lap top and can
- Attach two monitor and switch on the laptop
- automatically second monitor will show diplay
- if not then find out dual display symbol on the taskbar click on it.
- window will open select dual monitor
- click apply
- if not then right click on desktop --properties--desktop two monitors symbol will see select 2nd monitor
Trying to fix the color on my monitor
Click start control panel administration tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers
you might have to remove your graphics card to make sure the socket is clean
restart your computer the reinstall it this should activate found new hardware wizard
if your computer came with a mother board disk the drivers could be on it
click start control panel,display,desktop you can select a different desktop from the drop down list
or a browse button where you can select different pictures this may vary depending on your operating system
also you can change the settings for more or less pixels or from the drop down list pick the appropriate level of color range or troubleshoot also select advanced then general dpi normal size,larger size or custom settingsalways click APPLY after making any changes
hope this helps you
I have a eMachines w/
Hello laurences467,
Welcome, and thank you for using FixYa!
Your issue is the Power Supply Board. I repair ALOT of these by changing out bad Capacitors on the board.
Since you will not be able to find one of these, repaired already (refurbished board); it will be cheaper, in your case, to replace the monitor.
Your local, WalMart/Best Buy/Staples/Office Max all can give you some good price comparisons.
Have a great day!
Not finding what you are looking for?