20 Most Recent
ViewSonic VG900 19" Flat Panel LCD Monitor - Page 5 Questions & Answers
Why can't I get a signal from my Viewsonic monitor VS13860?
VA2448m-LED monitor. Ensure your cables are connected securely and the input source is correctly selected. Then make sure you are sending a valid timing resolution mode to the monitor. If this fails, please call ViewSonic technical support to help resolve your issue.
2/8/2015 2:41:05 AM •
ViewSonic...
•
Answered
on Feb 08, 2015
Plastic cover
How to remove back cover of ViewSonic G71F+. First remove the 3 screws at the bottom , one on each side and one above the VGA cable. Now look for three small slots on the top of the monitor near the screen. From the side opposite the screen insert 2 medium-small flat blade screwdrivers into the center slot and the slot on one side at an angle of about 25 degrees from the top plane of the monitor then gently pry up by pushing the screwdriver handles toward the top plane of the monitor. Once the plastic latch in the center and one side are released move the screwdriver on the side to the opposite side to release that side.
1/6/2015 5:05:45 AM •
ViewSonic...
•
Answered
on Jan 06, 2015
Hi. I have a viewsonic model VA712. I suspect a failed backlight. What to do?
well if you don't see a lot , your backlight is dead:), easy to repair since you propably get 3 screens which fit when you search for it and every screen is just an oem.... :). except the special expensive once. Take notice if your screen connection is left or right sided and besides get it removed and placed is by unscrew some screw and then comes the uncliccing parts; Use some a sharp screwdriving(with some tape on it to avoid get ugly points).
It's just clickwork, don't be afraid to ruse some strength.
good luck
9/7/2014 7:11:52 AM •
ViewSonic...
•
Answered
on Sep 07, 2014
Display too wide on monitor
if you r using WIN 7.then on desktop right click on blank area and choose screen resolution.
now select recommended resolution from the select.
9/1/2014 8:34:25 AM •
ViewSonic...
•
Answered
on Sep 01, 2014
Monitor pop noise
Please clarify what type of pop noise. Audio pop or just a pop noise and the unit may no longer be working?
8/31/2014 3:22:15 AM •
ViewSonic...
•
Answered
on Aug 31, 2014
RWM112310969
Check your computer to make sure it is actually sending out a signal. You can do this by hooking up another working monitor. If the other monitor works, there maybe a problem with the original monitor and it may need to be sent for service repair.
8/31/2014 3:10:55 AM •
ViewSonic...
•
Answered
on Aug 31, 2014
How to reset viewsonic vx2435wm
Usually ViewSonic products have a default memory as part of the OSD or menu system. Enter the menu by pressing the "1" button, then scroll down to find the default setting and execute it. If this doesn't resolve your issue, I recommend you call ViewSonic Customer Care for support.
8/31/2014 1:46:43 AM •
ViewSonic...
•
Answered
on Aug 31, 2014
Not finding what you are looking for?
now select recommended resolution from the select.
