20 Most Recent ViewSonic E70f 17" CRT Monitor Questions & Answers

0helpful

2answers

Ihave an view sonic E70fb

· The OSD Lock Out Message

Power your computer completely off and then remove the monitor cable from the port on the back side of the computer case. Reattach the cable and make sure the pins are correctly screwed in all of the way. Power the computer back on and check to see if the OSD lock out message is still being displayed.

· 2

Check the manual that came with your computer or monitor and locate the troubleshooting section if you are still receiving the OSD lock out message. Find the OSD lock out heading and read the method that your particular model of monitor uses to remove the lock out. Follow the instructions to remove the lock out.

· 3

Attempt generic lock out removal procedures if you no longer have the manual that came with your monitor. Press and hold the "Menu" button located at the bottom end of your monitor for 15 seconds and wait to see if the OSD lock out message disappears.

· 4

Press the "Menu" button again if the lock out message remains on the screen. Use the arrow buttons to navigate through the main menu options. Highlight the "Settings" or "OSD Menu" option and then hit the Menu key again to access the new list of settings.

· 5

The OSD Settings Menu Scroll down to the "OSD Lock" heading. Use the arrow keys to change the setting to "No." Hit the Menu key again to return to the main menu. Scroll over to the "Exit" setting and then hit the Menu key a final time to exit the menu setting and remove the OSD lock out

Read full answer

7/20/2021 12:22:05 PM • ViewSonic E70f... • Answered on Jul 20, 2021

0helpful

1answer

In my View sonic

It's time to responsibly recycle your old CRT monitor, and spend about $100 to buy a new 17" or 19" LCD screen, rather than spending any money at a qualified TV/video technician, trying to trouble-shoot the problem.

Read full answer

4/17/2015 8:47:43 PM • ViewSonic E70f... • Answered on Apr 17, 2015

0helpful

1answer

Where is menu button

Press the 1 key, it will bring up the menu.

Read full answer

2/8/2015 5:16:19 AM • ViewSonic E70f... • Answered on Feb 08, 2015

0helpful

1answer

OSD LOCK

You are having a problem with the OSD lock on your ViewSonic Monitor. Is that correct?
If so, please follow these instructions to unlock or lock your monitor.
On some display devices, there is an OSD Lock that locks all current control settings and prevents access to the control menus until this mode is unlocked.
The method for unlocking the OSD is different for different monitors, but will be one of the 2 below. If the first method doesn't work, try the second.
Method 1: Press and hold both the [1] button on the front of the monitor and the down arrow button for 10 seconds.
Method 2: Press and hold both the [1] button on the front of the monitor and the up arrow button for 10 seconds.
Note: These same buttons, when pressed for another 10 seconds, will lock the OSD

Please let us know if you require any further help with this matter.

If I've managed to answer your question or solve a problem, please take a moment to kindly rate this post....thanks!

Read full answer

10/8/2014 4:12:46 AM • ViewSonic E70f... • Answered on Oct 08, 2014

0helpful

1answer

I have a screen Foznk ViewSonic 70 F cable lump how this cable repaired by the colors of the wires Please help me because I do not find a solution to him and unfortunately for the weakness of the Engl

If it is a VGA cable, the chart is here... http://www.tomshardware.com/forum/291592-33-cable-color-code

Read full answer

5/28/2014 4:42:14 PM • ViewSonic E70f... • Answered on May 28, 2014

0helpful

1answer

Viewsonic e70f 17repair cable I need the rate color of cable ?

It's much better to just replace it.

Read full answer

3/20/2014 8:33:52 PM • ViewSonic E70f... • Answered on Mar 20, 2014

0answers

Nesecito manual de servicio 786n

Read full answer

Be the first to answer 3/20/2014 9:39:26 AM • ViewSonic E70f... • Posted on Mar 20, 2014 • Be the first to answer

0helpful

1answer

Repair wire from signal cable is disconnected or broken (15 Pin D shape Connector)

Soldering usually. Some connnectors were prefabricated with rubber being injection moulded. Your best bet is to purchase a 15 pin D connector and change the old one by soldering.

Read full answer

3/19/2014 10:59:08 AM • ViewSonic E70f... • Answered on Mar 19, 2014

0answers

Cyan and white stripes appear when turned on

Read full answer

Be the first to answer 3/19/2014 10:41:23 AM • ViewSonic E70f... • Posted on Mar 19, 2014 • Be the first to answer

0helpful

1answer

Diagrama

You can get them here:
http://elektrotanya.com/?q=showresult&megnev=ViewSonic%20&megnev2=E70f%20&kategoria=monitor&kat2=schematics

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series. Please leave rating if it helps.

Read full answer

11/21/2013 5:36:01 PM • ViewSonic E70f... • Answered on Nov 21, 2013

manual

E70f 17" CRT Monitor Manual

ViewSonic Computers & Internet • Uploaded on Aug 15, 2013

0helpful

3answers

My monitor viewsonic E70 blinking osd lock

you have to replace IC 7805

Read full answer

5/27/2013 4:29:36 PM • ViewSonic E70f... • Answered on May 27, 2013

0answers

How to unlock lg M237WD

Read full answer

Be the first to answer 3/30/2013 4:47:09 AM • ViewSonic E70f... • Posted on Mar 30, 2013 • Be the first to answer

0helpful

3answers

Help me my system is OSD Lock give me the

Option 1: OSD lock - all 4 buttons are locked except the "POWER"
button. Press and hold the "MENU" and ">" buttons for 3
seconds to lock the buttons. Repeat this step to unlock.

Option 2: OSD & Power button lock - all 5 buttons including the
"POWER" button are locked. Press and hold the "MENU"
and "<" buttons for 3 seconds to lock all 5 buttons. Repeat
this step to unlock.

Read full answer

11/17/2012 7:32:33 PM • ViewSonic E70f... • Answered on Nov 17, 2012

0answers

Reset saisho monitor

Read full answer

Be the first to answer 8/2/2012 4:10:53 AM • ViewSonic E70f... • Posted on Aug 02, 2012 • Be the first to answer

0helpful

3answers

I unlocked OSD Locked of CRT ViewSonic e70f by

monitor shows osd lock how to solve this problem

Read full answer

12/2/2011 9:05:11 AM • ViewSonic E70f... • Answered on Dec 02, 2011

0helpful

1answer

How can i unlock osd in my monitor

Same problem OSD main controls locked the 5 seconds later OSD main controls unlocked then system closes down sayingproblem with atkdisp, what does all this mean? Can still operate my computer but third damned flashing OSD message continues.-monchi

Read full answer

10/17/2011 11:31:20 AM • ViewSonic E70f... • Answered on Oct 17, 2011

0helpful

1answer

How to remove osd lock

Hey there.
I have recently written a tip on this OSD lockout problem. I suggest you give it a read and let me know how it goes.
You can see my tip here: http://www.fixya.com/support/r9424404-fix_osd_lockout_or_screen_display

Enjoy my tip.
Slasher_X

Read full answer

9/23/2011 12:12:01 PM • ViewSonic E70f... • Answered on Sep 23, 2011

0answers