20 Most Recent ViewSonic VX910 19" LCD Monitor Questions & Answers

When I start my game, monitor goes black and out of range appears

I suspect the game is trying to run in a resolution that is either not supported by the monitor or your video card. If there is a setup/configuration for the game please run it to choose a different resolution.

You can tell the resolution your are currently running by looking in control panel, display, settings.

Your monitor supports a max resolution of 1280x1024, so if the minimum requirements of the game are higher then the monitor simply will not work with the game. If the monitor meets the requirements then lets look at the max resolution of the video card you are using.

Please let us know if this has solved your problem or if you would like further assistance.

ViewSonic VX910... | Answered on May 28, 2018

1 Answer

The bottom of my screen is black and blue starting

I suggest either trying another monitor on the computer with this problem or plugging the monitor into another computer.

That will isolate the fault to either the computer or the monitor.

ViewSonic VX910... | Answered on Nov 15, 2017

0 Answers

Hi, i am anjireddy using the viewsonic monitor. i am getting the problem with the screen adjustment buttions and the options is scroling on the screen unable the adjust the screen setting . This is ha

ViewSonic VX910... | Posted on Nov 01, 2017 | Be the first to answer

0 Answers

Viewsonic VX900 LCD Monitor No Display.Bcklt and Screen Menu Work

It looks like you have to replace mainboard (it doesn't take input signals)

ViewSonic VX910... | Answered on Mar 26, 2017

0 Answers

View sonic va1931w3ma moniter repair

ViewSonic VX910... | Posted on Apr 18, 2014 | Be the first to answer

2 Answers

Most times when i turn on my computer, the screen flashes.

it means your computer has caught the ati2dvag bug. This bug seems to affect ATI video cards.

The 2 most common “solutions” are:

Reinstall the ATI driver. You are advised to launch Windows in Safe Mode (press F8 before Windows boots), go to Windows Add/Remove programs and uninstall everything ATI. Remove the DAO/MDAC component as well. You can use the ATI removal tool utility which can be downloaded from the ATI website. The complete set of instructions on removing ATI can be found here on the ATI website.
Go to System Devices in My Computer > Properties > Hardware, and locate the option, PCI standard PCI-to-PCI bridge. This could under other names on your PC, so contact your PC vendor if you’re unsure. Right click, and select the “update driver” option. Manually search and install the PCI standard PCI-to-PCI bridge.

ViewSonic VX910... | Answered on Jan 28, 2014

pdf Manual

VX910 19" LCD Monitor Manual

ViewSonic Computers & Internet | Uploaded on Oct 14, 2013

2 Answers

When I select sleep or hibernate mode - the monitor stays black...

Hit the keyboard keys. It is better to just turn sleep and hibernate off and just use a screen saver or tun it off.

ViewSonic VX910... | Answered on Mar 14, 2013

6 Answers

ViewSonic VA912b (Back light with blank dark screen)!

the capacitors in the monitor give out have to see a technician

ViewSonic VX910... | Answered on Dec 07, 2012

1 Answer

Sceen comes on for 3 sec. the light turns yellow

This model is known for having bad DC filter caps, they have bulging/leaking tops) as you can see here:
http://s807.photobucket.com/albums/yy352/budm/VIEWSONIC/Viewsonic%20VX710_910/

But you should check all the cable and try it with another PC first since Yellow light also indicate no video signal from PC.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

ViewSonic VX910... | Answered on Oct 05, 2011

1 Answer

I have a ViewSonic VX910

There should be no liquid coming out from the cap at all. Is it the one that has 250~350vdc rating on it? The one in my pix has very small leak coming out, you can barely see it.
See pix here; http://s807.photobucket.com/albums/yy352/budm/VIEWSONIC/Viewsonic%20VX710_910/?action=view&current=DSC00865.jpg

http://s807.photobucket.com/albums/yy352/budm/VIEWSONIC/Viewsonic%20VX710_910/
It should have about 160vdc on this cap, be carefull, this is the HOT (LINE) side of the AC primary circuits!

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: http://interliquidparts.com/

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

ViewSonic VX910... | Answered on Aug 11, 2011

1 Answer

No display, just black screen light on power

Look for bad caps as hsown in my pictures here:
http://s807.photobucket.com/albums/yy352/budm/VIEWSONIC/Viewsonic%20VX710_910/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

ViewSonic VX910... | Answered on Aug 07, 2011

1 Answer

When I turn on monitor

Hi,

You can try to replace all of bad capacitor on power inverter board. After all of failure capacitor was replace, try to turn on.

Thanks for visiting FixYa. We answer your question for FREE. Please feel free to click on "YES" button in return. Have a good time...!

Thanks

ViewSonic VX910... | Answered on Jun 28, 2011

1 Answer

Power light blinking on and off

You will need to replace the below failed caps.
2 - 1000uF @ 10V
3 - 470uF @ 25V
1 - 470uF @ 10V

ViewSonic VX910... | Answered on Apr 27, 2011

1 Answer

MY VX810 HAS DEVELOPED AN

It may have bad EEPROM or unstable 5vdc feeding the logic board, look inside for bad caps and check the 5vdc, similar to this: http://s807.photobucket.com/albums/yy352/budm/Viewsonic%20VX710_910/

http://www.fixya.com/support/r4554177-viewsonic_monitor_lock_unlock

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

ViewSonic VX910... | Answered on Apr 14, 2011

1 Answer

No power. Green light won't come on. Checked it

The power supply caps may have failed for the set this old as you can see in my pictures here: http://s807.photobucket.com/albums/yy352/budm/Viewsonic%20VX710_910/

If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed VIEWSONIC monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

ViewSonic VX910... | Answered on Mar 27, 2011

1 Answer

I have a ViewSonic VX910 LCD monitor. I turn it on

AllI can think of is that a tripler or inverter could be breaking down, causing the unit to go into auto
shutdown mode. Some devise is breaking down, and causing the unit to shut down.
Not an easy problem to troubleshoot unless you've got a schematic and tech skills.
Hope this helps

ViewSonic VX910... | Answered on Mar 26, 2011

20 Most Recent ViewSonic VX910 19" LCD Monitor Questions & Answers

When I start my game, monitor goes black and out of range appears

The bottom of my screen is black and blue starting

Hi, i am anjireddy using the viewsonic monitor. i am getting the problem with the screen adjustment buttions and the options is scroling on the screen unable the adjust the screen setting . This is ha

The OSD Locked stays on, or the brightness control

No problem yet. just aquired ViewSonicVX910

Viewsonic vx910 display does not stay on.

Viewsonic VX900 LCD Monitor No Display.Bcklt and Screen Menu Work

View sonic va1931w3ma moniter repair

Most times when i turn on my computer, the screen flashes.

VX910 19" LCD Monitor Manual

When I select sleep or hibernate mode - the monitor stays black...

ViewSonic VA912b (Back light with blank dark screen)!

Sceen comes on for 3 sec. the light turns yellow

I have a ViewSonic VX910

No display, just black screen light on power

When I turn on monitor

Power light blinking on and off

MY VX810 HAS DEVELOPED AN

No power. Green light won't come on. Checked it

I have a ViewSonic VX910 LCD monitor. I turn it on

Not finding what you are looking for?

Popular Tags

Ask a Question

Popular Products

ViewSonic VX2235wm LCD Monitor

ViewSonic VX922 19" Monitor Flat Panel

ViewSonic VX2235WM Monitor

ViewSonic VX924 19" LCD Monitor

ViewSonic VA720 17" LCD Flat Panel Monitor

Check Out the Mobile Browsers Report

Top ViewSonic Computers & Internet Experts

Ekse

Cindy Wells

Dimitar Todorov

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Manuals & User Guides

. VX910 19" LCD Monitor Manual

ViewSonic Computers & Internet

when turn monitor