Top 20 Hansol 730E 17" CRT Monitor Questions & Answers

Resolution settings are too high in monitor or computer video settings. Choose Recommended settings.

See my tip here: http://www.fixya.com/support/r9352105-fix_colored_vertical_lines_lcd_display

Being a rare tube monitor i am inclined to say it is nearing end of life. You have done the right thing by moving around unless you are moving other magnetic or power source items with it. Have you tried connecting to another computer - subbed out cables to eliminate that issue? testing on another computer who help determine if monitor or not. might be video card??/ since you are having DX issues I would start there. There is not much more you can do that is not dangerous - ie - increasing the voltage etc..

Spec:
http://www.hansol.nl/eng/730e.html

Since the company will nor even list the power consumption, You can make an estimate by reading the voltage and the current consumtion on the label, multiply voltage by current will give you wattage, but since the monitor is not linear load but reactive load, the power factor will not be 1 but usually about 0.6.
IE, 100V X 1AMP = 100VA. 100VA X PF OF 0.6 = 60WATTS.
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

check the cable connected on your monitor, see if this is fix and secure, on the other end of the cable, see also if this is properly connected to the video card.

If there is still no display, then my suggestion is you bring the monitor to a credible technician, and see if warranty is still available.

Install an AGP card into an AGP slot .because motherboard with internal display card does not support high resolution use 8X AGP card for better result

interesting, have you tried perhaps a monitor screen?

Assuming your running Windows as the operating system on your computer, go into Display Properties and set the refresh rate to something other than 60 hz or default. On my XP computer this can be done by right clicking on the desktop, clicking Properties -> Settings -> Advanced -> Monitor. Anything in the 70, 72, or 75 hz range should work fine. If this does not fix the problem and the monitor is out of warranty trash it and get another one.

No signal means the monitor is not detecting a signal from the video card. Can you give us a little history about what lead to the problem?

REPLACE THE BOOSTER C 5,6nF-1600V

This sounds as if you havent got the correct resolution of your desktop. Either there will be an auto adjust button to press on your monitor menu or you will need to Right click on your desktop>properties>settings Tab and change resolution to 1024 x 768 or similair to change the desktop size, or maybe reduce to 800 x 600 then click apply.

Many low width problems are caused by a leaky diode in the yoke return circuit. Often in a to220 package on the heatsink around the flyback. Mike

After checking these monitors I found that the capacitor next to the coil near the loptx was open circuit. The coil gets very hot and breaks down the 5n6 capacitor. I have replaced the capacitor and I now put it underneath the chassis as there is little room to move it away from the coil.

Hello and Welcome to FixYa!

This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 it will display out of range.

Solution of this problem is to reduce the resolution or refresh rate frequency.

Changing screen resolution in Windows XP: First right-click on the desktop and then left click on Properties from the menu that appears.

The display properties dialogue box will appear as shown in fig 1.1 below, click on the settings tab at the top right of the box.



The areas worth noting are:

Screen Resolution
This slide bar is what you use to change the resolution, the options you have will depend on your graphics card and monitor, but the standard options are 800x600, 1024x768 and 1152x864.

Normally the default (in XP) is set to 800x600 which means the display will be 800 pixels wide and 600 pixels high.

How to Change the Screen Refresh Rate of Your Monitor loadTOCNode(2, 'summary');

1. Click Start, click Control Panel, click Appearance and Themes, and then click Display.
   
   Alternatively, right-click the desktop, and then click Properties.
2. Click the Settings tab, and then click Advanced.
3. Click the Monitor tab, and then click the screen refresh rate that you want to use.

NOTE:

• The default refresh rate setting is 60 Hertz (HZ); however, your monitor may support a higher setting. Check your manufacturer's documentation for information about the settings that your monitor supports.
• If you use a higher refresh rate, you can reduce the rate that your screen flickers; however, if you specify a refresh rate that is too high for your monitor, your screen may become unusable and your hardware may be damaged.
• Changes to the refresh rate affect all users that log on to the computer.

Source:
http://www.helpwithpcs.com/tipsandtricks/changing-screen-resolution-win-xp.htm
http://support.microsoft.com/kb/311403

Kindly rate me if i was helpful.
Regards,
Waqar

In such cases the buttons do not work. Go to start->Control Panel->Display->Settings->Advanced->Monitor->Properties->Drivers. Here you will find an option of Uninstall drivers. Select it. and close all windows. Reboot the PC. Start->Control Panel->System->Hardware->Device Manager->Action->Scan for New HW. Windows will scan for new display and load its drivers. Your display would be alright.

Hello,

We carry the adapter you need, they run $16.95 plus $4.50 shipping.

Let me know at [email protected] if you are interested.

Buddy
Corporate Computer
www.ccl-la.com

Keep a backup on your hard drive or a backup. The backup system is a free service supplied by your internet provider. If you use it daily or after every update, there will never be an issue.

EnglishIt is a car, and cars are complexbut no car was told , maker, model , and year.we can not guess cars. post the VIN? and all that is knownname a problem what can't your car do right?name symptoms or evidence that is confusing to you.then answers can happen.onlygood luck , finding itand Mucho Gusto.my guess now is this is posted to computer forumand not to CARS !must be some odd traction controls thing'but 10,000 models of cars,

Five common problems a survey could uncover

LinkedIn · Oliver Moorhouse 2 years ago It's common for damp to be caused by a buildup of condensation and poor ventilation. Condensation damp is the most commonly found type of damp ...

What makes selling your home more difficult than buying? ...

Quora https://www.quora.com > What-makes-selling-your-ho... Dec 29, 2022 - When I have sold houses, I ask the realtor what they think the house will sell for. We price it at that, and we have always had offers higher. 3 answers · 14 votes: I have bought and sold dozens of homes. What "sells" a home: 1. Location 2. Street appeal ... What are the main problems home owners face when ... 5 answers Aug 21, 2018 Why are comprehensive property surveys not done ... 10 answers Oct 7, 2022 Are there any cons to closing on a home without a ... 6 answers Dec 9, 2021 More results from www.quora.com

17 Common Issues Found During A Property Survey

Petty Son and Prestwich https://www.pettyson.co.uk > About > Our Blog Drainage issues can vary from faulty drain pipes to sagging guttering, all of which will be pointed out by your surveyor in their report. Some drainage-related ...

Common Issues Revealed by House Surveys

Really Moving https://www.reallymoving.com > surveyors > guides > pr... What might my house survey find? · Japanese Knotweed · Subsidence · Dry rot · Woodworm · Damp · Asbestos · Electrical issues · Faulty drainpipes.