20 Most Recent Hotpoint RB757 Electric Kitchen Range - Page 8 Questions & Answers

look up online or appliance parts stores for replacement

What is the model number of the range

You are having connection issues, or a failing keypad. Disconnect the power. Pull down the control panel and disconnect the thin, flat ribbon connector that goes from the keypad to the control board, then re-connect the power and see if the F1 returns without the keypad attached. If it returns, get the computer board rebuilt at Corecentric Solutions. If the F1 doesn't return, buy a new keypad... Help Me Find My Model Number RepairClinic com

Hi, At the back of the oven the sensor wire connects to the erc wireing via a plug, cut out that plug, and hard wire the ends together, frequently that plugs connection is not tight enough, and will result in F2, if that does not fix it, replace the sensor. Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/10627-f2-error-code-hotpoint-range.html#ixzz46QP6HeOd http://forum.appliancepartspros.com I’m happy to help further over the phone at https://www.6ya.com/expert/gere_bf68e6055dd61249

get in an electrician as there is power bypassing the switch and that makes the stove dangerous as it is n know what wire is incorrectly connected

I can get the manual to you I can not load is here

Find your model number - Hotpoint

www.hotpointservice.co.uk/appliances/cookers.../find-your-model-numb...

Find your model number Find your model numberYour model number is located in the appliance user manual or on the product itself. On Hotpoint cookers and ...

Hotpoint Range Parts ' Sears PartsDirect

www.searspartsdirect.com > All Brands > Hotpoint Parts

Find replacement parts for any Hotpoint ranges repair project. ... Can't locate yourmodel number? Use our finder ... We carry replacement parts, repair parts and accessories for 1,874 Hotpoint Range models. REFINE BY ... ELECTRIC RANGE.

RB526DP1WW - Sears PartsDirect

www.searspartsdirect.com/model-number/rb526dp1ww/.../0124111.html

Shop for HOTPOINT ELECTRIC RANGE repair parts for model rb526dp1ww at Sears PartsDirect. Find ... Can't locate your model number? ... Find & Download ...

How to Find the Model Number on a Hotpoint Stove

metal expands when it is heated. There is a chance that replacing the burner would stop the noise till the standoff wears out again. Also the burner wells have inserts that the burner standoffs rest on. Replacing those might help. There is no danger present.

You need to replace the oven temp sensor

If you used the proper conversion kit and orifices, you should contact a plumber or gas appliance technician. Propane gas is very dangerous, and you may end up with a kitchen or structure fire.

Sounds like the sparker is in trouble. Get the oven details and ask your appliance dealer or go online to an appliance spares site. Before you spend any money, have a second opinion from an experienced person. You may have to remove the oven top to expose the igniters. Find a handbook, this level of checks is usually in the owners manual.

Stove in ? has electronic pilot so there is nothing to turn on top burners should have spark and oven has a glow if the burners not lite do you here a clicking sound no clicking spark box is bad oven not lite need glow price of glow $40 price of spark box $60

self clean and broil will make same heat for self clean if this is a gas range then change bake glow ignition more info can be yours send us full model # of range for more exact info of your range. electric range will be element bake or broken burned wire

Open oven temperature sensor circuit Measure oven temperature sensor circuit at oven temperature sensor (should be approx 1100 ohms at room temp); check for cut or pinched wire or loss of contact can all be done at back of range remove top and bottom cover sensor will be have 2 screws either in back or can be inside oven to remove sensor look for open wires or if unplugged from oven control board

Sound to me it is a older range screws some time strip out in the metal cabinet . a bit tricky to get out you need to pull on panel at same time turn screw. panel may also take a bit to brake loose . have some one pull while other turns screw . after that there are more of same to deal with depending what part your changing welcome to my world good luck