20 Most Recent Sony 2003 2004 03 04 Infiniti G35 Bose Am Fm Radio 6cd Changer Cassette - Page 8 Questions & Answers

Your amplifier must have speaker level inputs in order to connect to this Car deck. Can you give me the model number of the amp?

Pretty sure you just press the display button repeatedly to shut it off, but here is the manual just in case I missed it: https://docs.sony.com/release//MHC-GX255_GX355_GX555_RG575S_RG475S_RG470_RG270_RG170.pdf

floating ground adaptor found in any stereo shop 4 wires out to youre decks and ut has 2 rcas on the other side to use amp if thats what u want to do

The operating instructions and installation guide for the CDW-GT11W are available from the manufacturer's support site: https://esupport.sony.com/US/p/model-home.pl?mdl=CDXGT11W&template_id=1®ion_id=1&tab=manuals#/manualsTab . Click on the Manuals, Specs & Warranty tab. I needed to refresh the next page to download the manual (click on the circle with the arrow going clockwise). The direct link to the manual is currently https://docs.sony.com/release//CDXGT11W.pdf . I hope this helps. Cindy Wells

Sorry but it sounds like the subwoofer voice coil has shorted, you will need to replace the sub.

For radio codes contact this link: Car radio codes in Uxbridge London Gumtree

Your grounding the amplifier chassis, isolate the amp from the car and make sure the remote is not going to the power antena or illumination wires on the bavk of your head unit, remote wire/amp , or eq , sounds like a grounding a power wire..

The unit only requires .5 Cubic feet of volume for the enclosure. It would be best to figure out how much space you have to work with and then make a box to fit that space. If not measure the whole front of the speaker across the face. Allow 1/2 to one inch on either side. Lets say it is 12 inches. You need 14 to mount it easily, you can use less though. So you now know that your box has to be 14x14 length and width. Measure the distance from the magnet to the edge of the rim of the front. Lets say 5 inches, you now have 14x14x5. That comes to 980 cubic inches. To convert to feet you divide 980 by 1728 which is .56 cubic feet and that would be enough.. Measure (inside area, not the outside), make sure there is clearance for the magnet on the back so it is not touching the bottom of the box you need.