20 Most Recent Gateway FPD1760 17" LCD Monitor Questions & Answers

0helpful
1answer

When i boot up my

goes black. if the monitor fails on 2 PCs, the monitor is bad. is this hard to do, no. sounds like a bad monitor but Id have to touch it. if the cable is bad , this to will fail on 2 PC tests. easy no?
9/8/2018 12:54:46 PM • Gateway FPD1760... • Answered on Sep 08, 2018
0helpful
1answer

Picture has shifted to the left on my gateway FPD1760 monitor. How do I fix this?

Push The Auto/Sync Button
2/26/2015 9:34:46 PM • Gateway FPD1760... • Answered on Feb 26, 2015
0helpful
1answer

Vga cord for gateway fpd 1760

Search for it online (if still available).
9/20/2014 8:13:07 PM • Gateway FPD1760... • Answered on Sep 20, 2014
0helpful
1answer

FPD1760 17" LCD Monitor/driver download

Go to the online site that supports the monitor (depending on how old the unit is, it may not be available anymore).
9/20/2014 8:08:30 PM • Gateway FPD1760... • Answered on Sep 20, 2014
0helpful
2answers

Monitor Picture is Blurry because of shadows

If you've already checked all your cable connections, to make sure they're tight, check your windows settings: Go to Start>rt click My computer, choose properties, settings on performance, and choose adjust for best performance. (This will uncheck the shadow options for menus and icons, etc.) Take a look at your desktop. Is that better? If so, you might want to do some maintenance to improve your system performance by clicking here.
If no improvement, download or open the .pdf user guide for your monitor by clicking here. See pages 22, 17, and 12. They will show you how to use the auto button on the monitor to reset to optimal settings, to adjust the refresh rate (control panel>display>settings>advanced) to its optimum. (Normally, higher refresh rates indicate clearer pictures, but some LCD monitors seem to run better at a default 60hz rate. Check your Gateway documentation for your graphics adapter to see what it supports, (your monitor supports 60, 70, & 75), or experiment.)
If adjusting settings doesn't improve anything, you could search for updated drivers for your graphics adapter. Go to windows update and see if you're offered hardware updates, or search Gateway support for newer drivers.
Not many options left. See here.You could take it in to a local tech and have them take a quick look.( or try it on another computer).
If it's on its way to a sad end, I'm sorry. We have the same monitor at home and it's been great. Aside from a scratch someone put in it years back, it provides very clear resolution.
4/29/2014 5:59:53 PM • Gateway FPD1760... • Answered on Apr 29, 2014
0helpful
2answers

Hcl hcm780m display connector coding

please change your current RAM and upgrade it to newer one...
1/10/2014 12:43:10 PM • Gateway FPD1760... • Answered on Jan 10, 2014
0answers
0helpful
2answers

Ocasionally diagonal lines appear on

Hello. Have you tried using this monitor on a different computer? This would help us understand if this is being caused by your computer/video card or the monitor itself is dying and needs to be replaced/fixed.
7/21/2011 4:39:25 PM • Gateway FPD1760... • Answered on Jul 21, 2011
0helpful
1answer

Ther are faint wavy horizontal

7/12/2011 9:39:09 PM • Gateway FPD1760... • Answered on Jul 12, 2011
0helpful
1answer

The display on the screen is jumping and does not

A "previously-owned" 17-inch LCD screen probably will cost $30 to $50.
A brand-new 17-inch LCD screen is hard to find -- probably, nothing less than 19-inches is being sold, for $100 to $150.
An audio/video technician will charge $60 to $75 per hour to try to repair your LCD.

So, responsibly recycle (or "free-cycle") your old screen, and purchase a new 19-inch screen.
6/20/2011 7:20:22 PM • Gateway FPD1760... • Answered on Jun 20, 2011
0helpful
1answer

Which plug in the backof the monitor is output the

vga is the big plug that has pins inside it will usually be blue in nature hdmi is the flat thin plug
1/24/2011 2:35:55 PM • Gateway FPD1760... • Answered on Jan 24, 2011
0helpful
1answer

When i power it up it turns on for like 10 sec

Does it the same with another PC?
Most common failure in the LCD monitor is ude to bad DC filter caps, so that will be the first place to look.
Please read below first so you can decide if you will want to DIY repair.
If you are going to DIY and already try the monitor with another PC, and have proper tools and know safety precaution then please read on: Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed GATEWAY monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/ Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

1/1/2011 3:38:06 AM • Gateway FPD1760... • Answered on Jan 01, 2011
0helpful
1answer

There is no picture and the power button is

Power supply capacitors, worth taking it to a TV reoaurman for testing
12/29/2010 3:07:05 PM • Gateway FPD1760... • Answered on Dec 29, 2010
0helpful
1answer

Have lost the green and red colors, how do i

Check the cable and all the pins on both ends, also try it with another PC to make sure it is not the PC video card problem.

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

12/24/2010 5:22:16 AM • Gateway FPD1760... • Answered on Dec 24, 2010
0helpful
1answer

How can I unstick a pixel on an LCD monitor?

dont think u can if its a ded pixel u screwd
11/4/2010 10:04:51 PM • Gateway FPD1760... • Answered on Nov 04, 2010
0helpful
1answer

I have lost the picture

More likely to be bad DC filter caps.
If you are going to DIY and have proper tools and know safety precaution then please read on: Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

10/19/2010 6:35:00 PM • Gateway FPD1760... • Answered on Oct 19, 2010
0helpful
1answer

Is there any fast way to fix the monitor for

your lcd monitors smps is problem

change the smps from any monitor repair shop

ok bye
10/18/2010 8:47:54 AM • Gateway FPD1760... • Answered on Oct 18, 2010
Not finding what you are looking for?
Gateway FPD1760 17" LCD Monitor Logo

80 questions posted

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Cindy Wells

Level 3 Expert

6553 Answers

Brad Brown

Level 3 Expert

19163 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1192 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Gateway Computers & Internet

  • Gateway Computers & Internet

Most Popular Question

lost picture

  • Computers & Internet
Loading...